Kiremit Tipi Çatı Kaplamacısı (Seviye 3) MYK Mesleki Yeterlilik Belgesi

ISCO 08: 7121

ISCO 08: 7121

This qualification is for the profession of Tile Type Roofing (Level 3) to be carried out by trained and qualified people and to increase the quality of the works;

• To define the qualifications, knowledge, skills and competencies that candidates should have,
• To allow candidates to prove their professional competence with a valid and reliable document,
• It has been prepared to create references and resources for the education system, examination and certification bodies.

The learning outcomes of this qualification can be acquired in formal and non-formal learning environments such as educational institutions, as well as independently in on-the-job and free learning environments.

The person who has this qualification

• Explains the measures related to occupational health and safety.
• Explains the precautions to be applied regarding OHS in the work area.
• It lists the PPE that should be used for occupational health and safety.
• Explains how the workspace is checked for security.
• Explain what needs to be done to reduce environmental risks.
• Explains how to make the necessary separation and classification for the recovery of recyclable materials.
• Explains how wastes should be collected and stored according to their types.
• Implements the measures taken regarding occupational health and safety.
• Applies the measures taken regarding OHS in the work area.
• Uses necessary PPE for occupational health and safety.
• Controls the existing pitched roof framework (frame).
• Performs pre-work preparation control.
• Informs the relevant parties about the defects that are not under its authority.
• It makes clay or concrete tile type roofing application.
• Prepares before work. 3.2: It creates a carrier coating surface on the construction.
• It makes the insulation layers for the cold/warm roof.
• Roofing with clay or concrete tiles.
• Performs post-application operations.
• Performs job end checks.
• At the end of the work, he cleans the roof and environment in the work area.
• Implements the measures taken regarding occupational health and safety.
• Applies the measures taken regarding OHS in the work area.
• Uses necessary PPE for occupational health and safety.
• Controls the existing pitched roof framework (frame).
• Performs pre-job readiness check
• Informs the relevant parties about the defects that are not under its authority.
• It makes ceramic tile type roofing application.
• Prepares before work.
• It creates a carrier coating surface on the construction.
• It makes the insulation layers for the cold/warm roof.
• Roofing with Ceramic Tile.
• Performs post-application operations.
• Lists job end checks.
• At the end of the work, he cleans the roof and environment in the work area.
• Implements the measures taken regarding occupational health and safety.
• Applies the measures taken regarding OHS in the work area.
• Uses necessary PPE for occupational health and safety.
• Controls the existing pitched roof framework (frame).
• Performs pre-work preparation control.
• Informs the relevant parties about the defects that are not under its authority.
• It makes metal tile type roofing application.
• Prepares before work.
• It creates a carrier coating surface on the construction.
• It makes the insulation layers for the cold/warm roof.
• Roofing with Metal Tile.
• Performs post-application operations.
• Performs job end checks.
• At the end of the work, he cleans the roof and environment in the work area.
• Implements the measures taken regarding occupational health and safety.
• Applies the measures taken regarding OHS in the work area.
• Uses necessary PPE for occupational health and safety.
• Controls the existing pitched roof framework (frame).
• Performs pre-work preparation control.
• Informs the relevant parties about the defects that are not under its authority.
• It makes bituminous tile type roofing application.
• Prepares before work.
• It creates a carrier coating surface on the construction.
• It makes the insulation layers for the cold/warm roof.
• Roofing with bituminous tiles.
• Performs post-application operations.
• Performs job end checks.
• At the end of the work, he cleans the roof and environment in the work area.
• Implements the measures taken regarding occupational health and safety.
• Applies the measures taken regarding OHS in the work area.
• Uses necessary PPE for occupational health and safety.
• Controls the existing pitched roof framework (frame).
• Performs pre-work preparation control.
• Informs the relevant parties about the defects that are not under its authority.
• Makes slate roofing application.
• Prepares before work.
• It creates a carrier coating surface on the construction.
• It makes the insulation layers for the cold/warm roof.
• Makes roofing application with slate.
• Performs post-application operations.
• Performs job end checks.
• At the end of the work, he cleans the roof and environment in the work area.

This qualification aims to document professional learning outcomes and does not contain key competences.

Candidates who want to obtain the Tile Type Roofer (Level 3) Professional Competence Certificate are subjected to the exams defined in the relevant units. Candidates must be successful in the exams defined in the units in order to receive the professional qualification certificate.

Theoretical and performance-based exams in the qualification units can be done separately for each unit or together. However, each unit should be evaluated independently. The validity period of qualification units is 2 years from the date of achievement of the unit.

In order to obtain a qualification by combining the qualification units, all units must remain valid.

Quality assurance processes are provided through certification bodies authorized in line with the relevant legislation, under the responsibility of the Vocational Qualifications Authority.

Establishment and Approval of National Qualifications:

National qualifications developed by institutions and organizations that have the power to represent their sector and profession are verified by the Sector Committees and approved by the VQA Board of Directors.

Assesment and evaluation:

It is carried out by certification bodies accredited by TÜRKAK according to ISO/EN 17024 standard and authorized by the Vocational Qualifications Authority, in accordance with VQA legislation and conditions and methods defined in national qualifications. All measurement-evaluation processes are recorded and stored on camera.

Certification:

VQA Vocational Qualification Certificate is issued to individuals who are determined to be successful by the Authorized Certification Bodies.

Self assessment:

Authorized Certification Bodies carry out self-assessment activities every year in accordance with the procedures and principles determined by VQA. Activity results are submitted to VQA with a self-evaluation report.

External Evaluation:

Based on self-evaluation reports, scheduled or unscheduled surveillance audits are carried out at least once a year by the VQA Audit Department. External evaluation reports are submitted to Authorized Certification Bodies and VQA Board of Directors. In addition, surveillance audits are carried out by TÜRKAK at least every two years within the scope of ISO/EN 17024.

Regular Review:

The external evaluation activities and results of VQA Audit Department are regularly reviewed by VQA Executive Board. In addition, TÜRKAK's external evaluation activities and results are subject to regular review by the European Accreditation Union.

Information Management Systems:

Authorization, measurement-evaluation, self-evaluation and external evaluation processes are carried out through VQA Portal.

Feedback Mechanisms:

In all processes related to qualification, stakeholder participation is ensured at the highest level and opinions, suggestions, objections and complaints are evaluated in accordance with the legislation.

Entry condition is not required

1. Students who have graduated from vocational associate degree programs can transfer vertically to undergraduate programs as a result of the Vertical Transfer Exam (DGS) conducted by ÖSYM. Vertical transfer quotas are determined by YÖK decision, not to exceed ten percent of the quota determined in related undergraduate programs.

2. Vocational associate degree students have the right to participate in double major programs opened by the higher education institutions they are studying. Students enrolled in double major programs can take courses from both diploma programs simultaneously and receive two separate associate degree diplomas if they are successful.

Vocational Qualifications Authority Law

Regulation on Preparation of National Occupational Standards and National Qualifications

Vocational Qualifications Authority Examination, Measurement, Evaluation and Certification Regulation

Audit Procedures and Principles for Vocational Qualifications Authority Certification Bodies

Qualification certificate is valid for 5 years from the date of issue