Yeterlilik Kodu

TR0030020810

Yeterlilik Adı
Ameliyathane Hizmetleri Ön Lisans Diploması
Sorumlu KurumBeykoz Üniversitesi
Sorumlu Kurum İletişim BilgisiBeykoz Üniversitesi
Sorumlu Kurum URLhttp://www.beykoz.edu.tr/
YönelimGenel
AYÇ Seviyesi5
Yeterlilik TYÇ’ye yerleştirilmemiştir.
TYÇ Seviyesi 5
Sınıflandırma (Tematik Alan)Tıbbi teşhis ve tedavi teknolojisi
Sınıflandırma (Meslek Kodu) -
KategoriAna
Kredi Değeri120
Programın Normal Süresi 2
Program Profili (Amaç)

Hasta haklarını bilen ve hastanın güvenliğinin öneminin farkında, ameliyat öncesinde tüm cerrahi malzemeleri hazırlayan, ameliyat sırasında sterilliğin sürdürülmesini sağlayan ve ameliyat ekibine asistanlık yapabilecek sağlık personeli yetiştirmektir.

Öğrenme Ortamları-
Öğrenme Kazanımları (Tanım)
  • Ameliyathane hizmetlerine dair temel, kuramsal ve uygulamalı bilgileri açıklar.
  • Ameliyathane ortamında sterilizasyonun korunması ve sürdürülmesini sağlar.
  • Hasta güvenliğinin önemini kavrar.
  • Bir yarı yıl boyunca iş hayatının içinde bulunarak öğrendiği teorik bilgilerini uygular. 
  • İş dünyasının ve toplumun beklentileri doğrultusunda gelişen ve üniversitemizin kurumsal çıktıları olarak tanımlamış olduğu yetkinlikleri temel düzeyde kazanır.
Anahtar Yetkinlikler -
Ölçme ve Değerlendirme Yöntemleri -
Kalite Güvencesi-
Giriş Şartı

Bu programa öğrenci kabulü için gerekli koşullar “ Genel Kabul Koşulları ” başlığı altında verilmektedir. Bu koşulların dışında programa özgü özel koşul bulunmamaktadır.

Başarma ŞartlarıAmeliyathane Hizmetleri programı, 120 AKTS kredisinden oluşan 2 yıllık (4 yarıyıl) bir programdır. Programı başarı ile tamamlayan ve 4.00 üzerinden en az 2.00 ağırlıklı not ortalamasına sahip öğrencilere ameliyathane teknikeri önlisans derecesi (diploması) verilmektedir.
İlerleme Yolları (İlişki Türü)

Ameliyathane Hizmetleri Programından mezun olan öğrenciler; “Ameliyathane Teknikeri” olarak hastaneler, tıp fakülteleri hastaneleri, özel hastaneler ve klinikler olmak üzere kamu ve özel sektörde yer alan ameliyathanelerde çalışabilirler.

Yasal Dayanağı-
Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir.

Yeterliliğe Erişim için İnternet Adresi Adresi Aç
Yeterlilik Kodu

TR0030020810


Yeterlilik Adı
Ameliyathane Hizmetleri Ön Lisans Diploması

Sorumlu Kurum
Beykoz Üniversitesi

Sorumlu Kurum İletişim Bilgisi
Beykoz Üniversitesi

Sorumlu Kurum URL

Yönelim
Genel

Sınıflandırma (Meslek Kodu)
-

AYÇ Seviyesi
5

TYÇ Seviyesi
5
Yeterlilik TYÇ’ye yerleştirilmemiştir.

Sınıflandırma (Meslek Kodu)
-

Kategori
Ana

Kredi Değeri
120

Programın Normal Süresi
2

Program Profili (Amaç)

Hasta haklarını bilen ve hastanın güvenliğinin öneminin farkında, ameliyat öncesinde tüm cerrahi malzemeleri hazırlayan, ameliyat sırasında sterilliğin sürdürülmesini sağlayan ve ameliyat ekibine asistanlık yapabilecek sağlık personeli yetiştirmektir.


Öğrenme Ortamları
-

Öğrenme Kazanımları (Tanım)
  • Ameliyathane hizmetlerine dair temel, kuramsal ve uygulamalı bilgileri açıklar.
  • Ameliyathane ortamında sterilizasyonun korunması ve sürdürülmesini sağlar.
  • Hasta güvenliğinin önemini kavrar.
  • Bir yarı yıl boyunca iş hayatının içinde bulunarak öğrendiği teorik bilgilerini uygular. 
  • İş dünyasının ve toplumun beklentileri doğrultusunda gelişen ve üniversitemizin kurumsal çıktıları olarak tanımlamış olduğu yetkinlikleri temel düzeyde kazanır.

Anahtar Yetkinlikler
-

Ölçme ve Değerlendirme Yöntemleri
-

Kalite Güvencesi
-

Giriş Şartı

Bu programa öğrenci kabulü için gerekli koşullar “ Genel Kabul Koşulları ” başlığı altında verilmektedir. Bu koşulların dışında programa özgü özel koşul bulunmamaktadır.


Başarma Şartları
Ameliyathane Hizmetleri programı, 120 AKTS kredisinden oluşan 2 yıllık (4 yarıyıl) bir programdır. Programı başarı ile tamamlayan ve 4.00 üzerinden en az 2.00 ağırlıklı not ortalamasına sahip öğrencilere ameliyathane teknikeri önlisans derecesi (diploması) verilmektedir.

İlerleme Yolları (İlişki Türü)

Ameliyathane Hizmetleri Programından mezun olan öğrenciler; “Ameliyathane Teknikeri” olarak hastaneler, tıp fakülteleri hastaneleri, özel hastaneler ve klinikler olmak üzere kamu ve özel sektörde yer alan ameliyathanelerde çalışabilirler.


Yasal Dayanağı
-

Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir.


Yeterliliğe Erişim için İnternet Adresi
Adresi Aç

Qualification Code

TR0030020810

Qualification Title
Operating Room Services Associate Degree
Awarding BodyBEYKOZ UNIVERSITY
Awarding Body Contact
Awarding Body Urlhttp://www.beykoz.edu.tr/
OrientationGeneral
EQF Level5
The Qualification hasn't been included in TQF.
TQF Level 5
Thematic AreasMedical diagnostic and treatment technology
National Occupation Classification

ISCO 08

CategoryMain
Credit Value120
Program Duration2
Program Profile-
Learning Environments-
Description
  • Explains basic, theoretical and practical information about operating room services,
  • It provides protection and maintenance of sterilization in the operating room environment.
  • Understands the importance of patient safety.
  • He / she applies the theoretical knowledge he / she learned in business life for a half year.
  • The competencies that are developed in line with the expectations of the business world and society and which are defined as the institutional outputs of our university are at the basic level.
Key Competencies-
Further Info

The articles related to Education Training and Exam Regulations of Beykoz University Undergraduate and Associate Degree Programs are mentioned below.

Assessment, evaluation and final grade Exams ARTICLE 31 -

  • Exams consist of short and midterm exams and final exams, single course exams, make-up exams, exemption exams and additional exams which are held in the semester.

Final Grade ARTICLE 38 – 

  • The final grade of students in a formal program related to a course is calculated through; 50% of the weighted average of the grades they receive from the midterm assessment and evaluation activities and 50% of the grades they receive from the final exam.  
  • Evaluating a course depends on: Students whose grade of success and / or final grade are under 35 are considered to be unsuccessful for that course. 
  • There is no midterm and final examination for professional practice (internship) at work. The evaluation related to this learning activity is carried out through following the instructions of Beykoz University Professional Practice (Internship) Directive. The final grade of the related activity is evaluated by the grade of Successful (BI) and Unsuccessful (BZ); these grades are not included in the grade point average. 
  • The final grades of the courses that do not require midterm and/or final exams can be evaluated as Successful (BI) / Unsuccessful (BZ) with an absolute grade according to the quality of the courses ; these grades are not included in the grade point average. 
  •  For the courses that do not require midterm and/or final exams and that have incomplete evaluation processes, Incomplete (E) grade can be given temporarily. The final grades of these courses are turned into absolute grades or Successful (BI) / Unsuccessful (BZ) when the evaluation process is complete.  

Calculating final grade and explanations   ARTICLE 41 – 

  • Final grades are calculated by considering statistical dispersion of grades and class average and converted to letter grades by “Beykoz University Relative Evaluation Directions” For the numbers of students that are not applicable to minimum relative evaluation, absolute grading system is used. The correlation between absolute grades and letter grades and their numeric grade equivalents are given in Table 1. Table 1: The correlation between absolute grades and letter grades and their numeric grade equivalents     Absolute Grade Letter Grade Numeric Grade Meaning 90 - 100 AA 4,0 Perfect 80 - 89 BA 3,5 Very Good 73 - 79 BB 3,0 Good 66 - 72 CB 2,5 Average 60 - 65 CC 2,0 Sufficient 55 - 59 DC 1,5 Pass 50-54 DD 1,0 Pass 36- 49 FD 0,5 Fail 0 - 35 FF 0,0 Fail due to absence - DZ 0,0 Fail due to absence - BI - Successful - BZ - Unsuccessful - M - Exempted  -  W  - Withdrawal  -   E  - Incomplete Grade  

a) A student who gets (AA), (BA), (BB), (CB), (CC), (DC) and (DD), (BI), (M) as a final grade for a class is considered to have passed from that class.  

b) A student who gets (FD), (FF) from a class is considered to have failed from it.  

c)  Students who do not meet the attendance requirements of a class are given DZ grade. DZ grade is counted as FF when grade point average is calculated.  

d)  (BI) is given as a grade which is not added to the grade point average and for the classes a student has passed.     

e) (BZ) is given as a grade which is not added to the grade point average and for the classes a student has not passed.  

f) (M) is given as a grade which is not added to the grade point average, and is given to the students who is counted as exempt from a class as a result of the evaluation of the exemption  in accordance with paragraph 3 in article 29 of this regulation  

g) (W) is a grade used to identify a students’ situation in the transcript in the event of a withdrawal from a class.  

h) (E) Ungraded is a temporary grade which is given to the students when the assessment process has not been completed yet. (E) grade which is not changed within the predetermined deadline will be converted to a failed grade.  

  • Conversion of university letter grades to ECTS grades and vice versa is carried out in accordance with “Beykoz University ECTS Application Guideline”.  

The Calculation of Grade Points Average ARTICLE 42 – 

  • Grade Points Average (GPA) is calculated on all the semesters by multiplying the number of credits given for a course times the value of the grade received for the course, adding the value calculated for each class and dividing by the total number of credits. 
  • Semester Grade Average is calculated within any semester by multiplying the number of credits given for a course times the value of the grade received for the course, adding the value calculated for each class and dividing by the total number of credits. 
  • Three-digit process is carried out in the calculation of the grade average and it is displayed in two-digit figure. During the rounding process, if the third digit figure after the decimal point is between 0-4, it is rounded downwards, but if it is between 5-9, it is rounded upwards.    
Quality Assurance-
Access Requirements

The requirements for admission to this program are given under the heading "General Admission Requirements". There are no special conditions specific to the program other than these conditions.

Conditions for Success-
Progression Paths (Relationship Type)

Students who have graduated from the Operating Room Services Program; "Operating room technicians" can work in public and private operating rooms, including hospitals, medical facilities hospitals, private hospitals and clinics.

Legal Basis-
Validity Period (If Any)-
Url Open Address
Qualification Code

TR0030020810


Qualification Title
Operating Room Services Associate Degree

Awarding Body
BEYKOZ UNIVERSITY

Awarding Body Contact

Awarding Body Url

Orientation
General

National Occupation Classification

ISCO 08


EQF Level
5

TQF Level
5
The Qualification hasn't been included in TQF.

National Occupation Classification

ISCO 08


Category
Main

Credit Value
120

Program Duration
2

Program Profile
-

Learning Environments
-

Description
  • Explains basic, theoretical and practical information about operating room services,
  • It provides protection and maintenance of sterilization in the operating room environment.
  • Understands the importance of patient safety.
  • He / she applies the theoretical knowledge he / she learned in business life for a half year.
  • The competencies that are developed in line with the expectations of the business world and society and which are defined as the institutional outputs of our university are at the basic level.

Key Competencies
-

Further Info

The articles related to Education Training and Exam Regulations of Beykoz University Undergraduate and Associate Degree Programs are mentioned below.

Assessment, evaluation and final grade Exams ARTICLE 31 -

  • Exams consist of short and midterm exams and final exams, single course exams, make-up exams, exemption exams and additional exams which are held in the semester.

Final Grade ARTICLE 38 – 

  • The final grade of students in a formal program related to a course is calculated through; 50% of the weighted average of the grades they receive from the midterm assessment and evaluation activities and 50% of the grades they receive from the final exam.  
  • Evaluating a course depends on: Students whose grade of success and / or final grade are under 35 are considered to be unsuccessful for that course. 
  • There is no midterm and final examination for professional practice (internship) at work. The evaluation related to this learning activity is carried out through following the instructions of Beykoz University Professional Practice (Internship) Directive. The final grade of the related activity is evaluated by the grade of Successful (BI) and Unsuccessful (BZ); these grades are not included in the grade point average. 
  • The final grades of the courses that do not require midterm and/or final exams can be evaluated as Successful (BI) / Unsuccessful (BZ) with an absolute grade according to the quality of the courses ; these grades are not included in the grade point average. 
  •  For the courses that do not require midterm and/or final exams and that have incomplete evaluation processes, Incomplete (E) grade can be given temporarily. The final grades of these courses are turned into absolute grades or Successful (BI) / Unsuccessful (BZ) when the evaluation process is complete.  

Calculating final grade and explanations   ARTICLE 41 – 

  • Final grades are calculated by considering statistical dispersion of grades and class average and converted to letter grades by “Beykoz University Relative Evaluation Directions” For the numbers of students that are not applicable to minimum relative evaluation, absolute grading system is used. The correlation between absolute grades and letter grades and their numeric grade equivalents are given in Table 1. Table 1: The correlation between absolute grades and letter grades and their numeric grade equivalents     Absolute Grade Letter Grade Numeric Grade Meaning 90 - 100 AA 4,0 Perfect 80 - 89 BA 3,5 Very Good 73 - 79 BB 3,0 Good 66 - 72 CB 2,5 Average 60 - 65 CC 2,0 Sufficient 55 - 59 DC 1,5 Pass 50-54 DD 1,0 Pass 36- 49 FD 0,5 Fail 0 - 35 FF 0,0 Fail due to absence - DZ 0,0 Fail due to absence - BI - Successful - BZ - Unsuccessful - M - Exempted  -  W  - Withdrawal  -   E  - Incomplete Grade  

a) A student who gets (AA), (BA), (BB), (CB), (CC), (DC) and (DD), (BI), (M) as a final grade for a class is considered to have passed from that class.  

b) A student who gets (FD), (FF) from a class is considered to have failed from it.  

c)  Students who do not meet the attendance requirements of a class are given DZ grade. DZ grade is counted as FF when grade point average is calculated.  

d)  (BI) is given as a grade which is not added to the grade point average and for the classes a student has passed.     

e) (BZ) is given as a grade which is not added to the grade point average and for the classes a student has not passed.  

f) (M) is given as a grade which is not added to the grade point average, and is given to the students who is counted as exempt from a class as a result of the evaluation of the exemption  in accordance with paragraph 3 in article 29 of this regulation  

g) (W) is a grade used to identify a students’ situation in the transcript in the event of a withdrawal from a class.  

h) (E) Ungraded is a temporary grade which is given to the students when the assessment process has not been completed yet. (E) grade which is not changed within the predetermined deadline will be converted to a failed grade.  

  • Conversion of university letter grades to ECTS grades and vice versa is carried out in accordance with “Beykoz University ECTS Application Guideline”.  

The Calculation of Grade Points Average ARTICLE 42 – 

  • Grade Points Average (GPA) is calculated on all the semesters by multiplying the number of credits given for a course times the value of the grade received for the course, adding the value calculated for each class and dividing by the total number of credits. 
  • Semester Grade Average is calculated within any semester by multiplying the number of credits given for a course times the value of the grade received for the course, adding the value calculated for each class and dividing by the total number of credits. 
  • Three-digit process is carried out in the calculation of the grade average and it is displayed in two-digit figure. During the rounding process, if the third digit figure after the decimal point is between 0-4, it is rounded downwards, but if it is between 5-9, it is rounded upwards.    

Quality Assurance
-

Access Requirements

The requirements for admission to this program are given under the heading "General Admission Requirements". There are no special conditions specific to the program other than these conditions.


Conditions for Success
-

Progression Paths (Relationship Type)

Students who have graduated from the Operating Room Services Program; "Operating room technicians" can work in public and private operating rooms, including hospitals, medical facilities hospitals, private hospitals and clinics.


Legal Basis
-

Validity Period (If Any)
-

Url
Open Address