Yeterlilik Kodu

TR0030009367

Yeterlilik Adı
Biyomühendislik Lisans Diploması
Sorumlu KurumFırat Üniversitesi
Sorumlu Kurum İletişim BilgisiFırat Üniversitesi, Üniversite Mahallesi, Fırat Ünv., 23119 Elâzığ Merkez/Elazığ
Sorumlu Kurum URLhttp://www.firat.edu.tr
Yönelim-
AYÇ Seviyesi6
Yeterlilik TYÇ’ye yerleştirilmemiştir.
TYÇ Seviyesi 6
Sınıflandırma (Tematik Alan)Biyoloji
Sınıflandırma (Meslek Kodu) -
Kategori-
Kredi Değeri-
Programın Normal Süresi -
Program Profili (Amaç)-
Öğrenme Ortamları-
Öğrenme Kazanımları (Tanım)
  • Matematik, Fen, Mühendislik ve biyoteknoloji alanlarında temel bilgilere sahip olabilme,
  • Biyomühendislik alanındaki problemleri belirleme, modelleme, analiz etme becerisi,
  • Bir sistemi, sistem parçasını ya da bir prosesi analiz etme ve istenenleri sağlayacak şekilde tasarlama becerisi,
  • Bireysel ve grup içerisinde çalışma becerisi,
  • Disiplinler arası çalışma becerisi,
  • Mesleki ve sosyal etik sorumluluğu ve çevre bilinci,
  • Çağdaş konular hakkında bilgi sahibi olma ve kalite yönetimi hakkında beceri sahibi olma,
  • Sözlü ve yazılı etkin iletişim kurma ve yöneticilik becerisi,
  • Deney tasarlama, yapma, sonuçlarını analiz etme, yorumlama ve sentez yapabilme becerisi,
  • Modern mühendislik tekniklerini kullanabilme ve gelişen bilim ve teknolojiye ayak uydurabilme becerisi,
  • Milli öncelikleri belirleyebilme ve bu konulardaki gelişmeleri yakından izleyebilme,
  • Araştırıcı, üretici ve girişimci kapasiteye sahip olabilme yetisi kazanır.
Anahtar Yetkinlikler -
Ölçme ve Değerlendirme Yöntemleri

BAŞARI NOTU KAT SAYIAA 4.00BA 3.50BB 3.00CB 2.50CC 2.00DC 1.50DD 1.00FF 0.00Öğrencinin programdaki tüm derslerini başarmış olması gerekir. Bu programda öğrencinin asgari 240 ECTS kredisini sağlaması ve genel not ortalamasının 4,00 üzerinden en az 2,00 olması gerekmektedir.

Kalite Güvencesi-
Giriş Şartı

Türk ve yabancı öğrenciler için genel kabul şartları programa başlamak için geçerlidir.

Başarma ŞartlarıÖğrencinin programdaki tüm derslerini başarmış olması gerekir. Bu programda öğrencinin asgari 240 ECTS kredisini sağlaması ve genel not ortalamasının 4,00 üzerinden en az 2,00 olması gerekmektedir. Öğrencinin programdaki tüm derslerini başarmış olması gerekir. Bu programda öğrencinin asgari 240 ECTS kredisini sağlaması ve genel not ortalamasının 4,00 üzerinden en az 2,00 olması gerekmektedir.
İlerleme Yolları (İlişki Türü)

Biyomühendislik lisans proğramını tamamlayanlar gıda, tarım, sağlık ve ilaç sektöründen, çevre sektörüne kadar geniş bir endüstriyel yelpazede, hastane ve kliniklerde, Hıfsısıhha ve TSE gibi yasal yükümlülükleri olan kuruluşlarda, genetik tanı ve tedavi merkezlerinde, aşı üretim tesislerinde, ithalat – ihracat şirketlerinde görev alabilirler. Araştırmacı, öğretim görevlisi olarak çalışmak isteyenlerin lisans üstü eğitim yapmaları gerekmektedir. Öğrenciler eğitimleri süresince Kredi ve Yurtlar Kurumu tarafından verilen öğrenim ve harç kredisinden yararlanabilirler. Ayrıca özel ve kamu kurumlarının sağladığı burs imkanlarından da yararlanabilmektedirler. Eğitim sonrası kazanç ise, çalışılan kuruluşun türüne, çalışılan pozisyona, firmanın ücret politikasına ve şehre göre değişmektedir. Kamu kurum ve kuruluşlarında çalışanlar 657 sayılı kanunda belirtilen teknik hizmetler sınıfındaki kadroların derece ve kademesinden maaş alırlar.

Yasal Dayanağı-
Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir

Yeterliliğe Erişim için İnternet Adresi Adresi Aç
Yeterlilik Kodu

TR0030009367


Yeterlilik Adı
Biyomühendislik Lisans Diploması

Sorumlu Kurum
Fırat Üniversitesi

Sorumlu Kurum İletişim Bilgisi
Fırat Üniversitesi, Üniversite Mahallesi, Fırat Ünv., 23119 Elâzığ Merkez/Elazığ

Sorumlu Kurum URL

Yönelim
-

Sınıflandırma (Meslek Kodu)
-

AYÇ Seviyesi
6

TYÇ Seviyesi
6
Yeterlilik TYÇ’ye yerleştirilmemiştir.

Sınıflandırma (Meslek Kodu)
-

Kategori
-

Kredi Değeri
-

Programın Normal Süresi
-

Program Profili (Amaç)
-

Öğrenme Ortamları
-

Öğrenme Kazanımları (Tanım)
  • Matematik, Fen, Mühendislik ve biyoteknoloji alanlarında temel bilgilere sahip olabilme,
  • Biyomühendislik alanındaki problemleri belirleme, modelleme, analiz etme becerisi,
  • Bir sistemi, sistem parçasını ya da bir prosesi analiz etme ve istenenleri sağlayacak şekilde tasarlama becerisi,
  • Bireysel ve grup içerisinde çalışma becerisi,
  • Disiplinler arası çalışma becerisi,
  • Mesleki ve sosyal etik sorumluluğu ve çevre bilinci,
  • Çağdaş konular hakkında bilgi sahibi olma ve kalite yönetimi hakkında beceri sahibi olma,
  • Sözlü ve yazılı etkin iletişim kurma ve yöneticilik becerisi,
  • Deney tasarlama, yapma, sonuçlarını analiz etme, yorumlama ve sentez yapabilme becerisi,
  • Modern mühendislik tekniklerini kullanabilme ve gelişen bilim ve teknolojiye ayak uydurabilme becerisi,
  • Milli öncelikleri belirleyebilme ve bu konulardaki gelişmeleri yakından izleyebilme,
  • Araştırıcı, üretici ve girişimci kapasiteye sahip olabilme yetisi kazanır.

Anahtar Yetkinlikler
-

Ölçme ve Değerlendirme Yöntemleri

BAŞARI NOTU KAT SAYIAA 4.00BA 3.50BB 3.00CB 2.50CC 2.00DC 1.50DD 1.00FF 0.00Öğrencinin programdaki tüm derslerini başarmış olması gerekir. Bu programda öğrencinin asgari 240 ECTS kredisini sağlaması ve genel not ortalamasının 4,00 üzerinden en az 2,00 olması gerekmektedir.


Kalite Güvencesi
-

Giriş Şartı

Türk ve yabancı öğrenciler için genel kabul şartları programa başlamak için geçerlidir.


Başarma Şartları
Öğrencinin programdaki tüm derslerini başarmış olması gerekir. Bu programda öğrencinin asgari 240 ECTS kredisini sağlaması ve genel not ortalamasının 4,00 üzerinden en az 2,00 olması gerekmektedir. Öğrencinin programdaki tüm derslerini başarmış olması gerekir. Bu programda öğrencinin asgari 240 ECTS kredisini sağlaması ve genel not ortalamasının 4,00 üzerinden en az 2,00 olması gerekmektedir.

İlerleme Yolları (İlişki Türü)

Biyomühendislik lisans proğramını tamamlayanlar gıda, tarım, sağlık ve ilaç sektöründen, çevre sektörüne kadar geniş bir endüstriyel yelpazede, hastane ve kliniklerde, Hıfsısıhha ve TSE gibi yasal yükümlülükleri olan kuruluşlarda, genetik tanı ve tedavi merkezlerinde, aşı üretim tesislerinde, ithalat – ihracat şirketlerinde görev alabilirler. Araştırmacı, öğretim görevlisi olarak çalışmak isteyenlerin lisans üstü eğitim yapmaları gerekmektedir. Öğrenciler eğitimleri süresince Kredi ve Yurtlar Kurumu tarafından verilen öğrenim ve harç kredisinden yararlanabilirler. Ayrıca özel ve kamu kurumlarının sağladığı burs imkanlarından da yararlanabilmektedirler. Eğitim sonrası kazanç ise, çalışılan kuruluşun türüne, çalışılan pozisyona, firmanın ücret politikasına ve şehre göre değişmektedir. Kamu kurum ve kuruluşlarında çalışanlar 657 sayılı kanunda belirtilen teknik hizmetler sınıfındaki kadroların derece ve kademesinden maaş alırlar.


Yasal Dayanağı
-

Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir


Yeterliliğe Erişim için İnternet Adresi
Adresi Aç

Qualification Code

TR0030009367

Qualification Title
Bioengineering License
Awarding BodyFirat University
Awarding Body ContactFirat University, 23119 Elazig, Turkey
Awarding Body Urlhttp://www.firat.edu.tr
Orientation-
EQF Level6
The Qualification hasn't been included in TQF.
TQF Level 6
Thematic AreasBiology
National Occupation Classification -
Category-
Credit Value-
Program Duration-
Program Profile-
Learning Environments-
Description
  • To have basic knowledge in mathematics, science, engineering, and biotechnology subjects.
  • Ability to identify, modeling, and analysis problems in the field of bioengineering.
  • Ability to analyze and design a system, part of the system, or a process under the desired conditions.
  • Ability to work in individual and group.
  • Ability to work interdisciplinary.
  • Awareness of professional and social ethics responsibility and environmental responsibility .
  • To have knowledge about contemporary issues and ability to quality management.
  • To communicate effectively in oral and written and ability to management.
  • Ability to experimental design, make, analyze and interpretation of experimental results, and synthesis.
  • Ability to use modern engineering techniques and to adapt developing technology.
  • To determine national priorities and to closely follow in this subjects.
  • Ability to have capacity researcher, producer, and entrepreneur.
Key Competencies-
Further Info

Examinations, assessment and grading are held according to the regulations arranged by the University Senate. There are one midterm and one final examination for each course. Examinations are written examinations however if necessary they can also be performed orally or by practice work. The evaluation of the weights of the courses is determined by the lecturer at the beginning of the semester. The weight of the final examination can not be less than 60%. The final evaluation is performed by the lecturer.All students are required to perform summer practices as a part of graduation requirements. They must complete a summer practice of at least 40 working days in two seperate sessions. For the summer practice evaluation, students have to pass both from the summer practice report and presentation. During the summer practice presentations, each committe of lecturers evaluates the students performance separately and an average score is calculated for the student. GRADEFACTORAA 4.0BA 3.5BB 3.0CB 2.5CC 2.0DC 1.5DD 1.0FF 0.0A student is required to successfully complete the designated program of courses meet a minimum of 240 ECTS credit requirement and have a minimum GPA of 2.00/4.00 and no FF grades.

Quality Assurance-
Access Requirements

High School Diploma plus placement by the Student Selection and Placement Centre according to the score obtained in the Student Selection Examination and the student’s preferences.For foreign students, High School Diploma plus placement of the student by the university according to his score in Foreign Student Examination and student’s preferences.

Conditions for SuccessA student is required to successfully complete the designated program of courses meet a minimum of 240 ECTS credit requirement and have a minimum GPA of 2.00/4.00 and no FF grades.A student is required to successfully complete the designated program of courses meet a minimum of 240 ECTS credit requirement and have a minimum GPA of 2.00/4.00 and no FFgrades.
Progression Paths (Relationship Type)

Bioengineering undergraduate program in food, agriculture, health and pharmaceutical sector, environmental sector, a wide range of industrial, hospital and clinics, Hıfsısıhha and organizations that have legal obligations, such as TSE, genetic diagnosis, and treatment centers, vaccine production facilities, import - export companies can become members of . The researcher, who want to work as an instructor are required to do post-graduate training. Students are learning throughout their education and tuition credits issued by the Credit and Hostels Institution enjoy. In addition, opportunities may also benefit from scholarships provided by private and public institutions. Earnings after training, worked on the type of organization, working position, the company’s wage policy, and varies according to the city. Employees of public institutions and agencies specified by law No. 657-class technical services staff will receive a salary grade and stage.

Legal Basis-
Validity Period (If Any)

Qualification is continuous

Url Open Address
Qualification Code

TR0030009367


Qualification Title
Bioengineering License

Awarding Body
Firat University

Awarding Body Contact
Firat University, 23119 Elazig, Turkey

Awarding Body Url

Orientation
-

National Occupation Classification
-

EQF Level
6

TQF Level
6
The Qualification hasn't been included in TQF.

National Occupation Classification
-

Category
-

Credit Value
-

Program Duration
-

Program Profile
-

Learning Environments
-

Description
  • To have basic knowledge in mathematics, science, engineering, and biotechnology subjects.
  • Ability to identify, modeling, and analysis problems in the field of bioengineering.
  • Ability to analyze and design a system, part of the system, or a process under the desired conditions.
  • Ability to work in individual and group.
  • Ability to work interdisciplinary.
  • Awareness of professional and social ethics responsibility and environmental responsibility .
  • To have knowledge about contemporary issues and ability to quality management.
  • To communicate effectively in oral and written and ability to management.
  • Ability to experimental design, make, analyze and interpretation of experimental results, and synthesis.
  • Ability to use modern engineering techniques and to adapt developing technology.
  • To determine national priorities and to closely follow in this subjects.
  • Ability to have capacity researcher, producer, and entrepreneur.

Key Competencies
-

Further Info

Examinations, assessment and grading are held according to the regulations arranged by the University Senate. There are one midterm and one final examination for each course. Examinations are written examinations however if necessary they can also be performed orally or by practice work. The evaluation of the weights of the courses is determined by the lecturer at the beginning of the semester. The weight of the final examination can not be less than 60%. The final evaluation is performed by the lecturer.All students are required to perform summer practices as a part of graduation requirements. They must complete a summer practice of at least 40 working days in two seperate sessions. For the summer practice evaluation, students have to pass both from the summer practice report and presentation. During the summer practice presentations, each committe of lecturers evaluates the students performance separately and an average score is calculated for the student. GRADEFACTORAA 4.0BA 3.5BB 3.0CB 2.5CC 2.0DC 1.5DD 1.0FF 0.0A student is required to successfully complete the designated program of courses meet a minimum of 240 ECTS credit requirement and have a minimum GPA of 2.00/4.00 and no FF grades.


Quality Assurance
-

Access Requirements

High School Diploma plus placement by the Student Selection and Placement Centre according to the score obtained in the Student Selection Examination and the student’s preferences.For foreign students, High School Diploma plus placement of the student by the university according to his score in Foreign Student Examination and student’s preferences.


Conditions for Success
A student is required to successfully complete the designated program of courses meet a minimum of 240 ECTS credit requirement and have a minimum GPA of 2.00/4.00 and no FF grades.A student is required to successfully complete the designated program of courses meet a minimum of 240 ECTS credit requirement and have a minimum GPA of 2.00/4.00 and no FFgrades.

Progression Paths (Relationship Type)

Bioengineering undergraduate program in food, agriculture, health and pharmaceutical sector, environmental sector, a wide range of industrial, hospital and clinics, Hıfsısıhha and organizations that have legal obligations, such as TSE, genetic diagnosis, and treatment centers, vaccine production facilities, import - export companies can become members of . The researcher, who want to work as an instructor are required to do post-graduate training. Students are learning throughout their education and tuition credits issued by the Credit and Hostels Institution enjoy. In addition, opportunities may also benefit from scholarships provided by private and public institutions. Earnings after training, worked on the type of organization, working position, the company’s wage policy, and varies according to the city. Employees of public institutions and agencies specified by law No. 657-class technical services staff will receive a salary grade and stage.


Legal Basis
-

Validity Period (If Any)

Qualification is continuous


Url
Open Address