Yeterlilik Kodu | TR0030008814 | |
Yeterlilik Adı | Biyomühendislik Tezli Yüksek Lisans Diploması | |
Sorumlu Kurum | Tokat Gaziosmanpaşa Üniversitesi | |
Sorumlu Kurum İletişim Bilgisi | Gaziosmanpaşa Üniversitesi, Taşlıçiftlik Yerleşkesi | |
Sorumlu Kurum URL | http://www.gop.edu.tr | |
Yönelim | Akademik | |
AYÇ Seviyesi | 7 | Yeterlilik TYÇ’ye yerleştirilmemiştir. |
TYÇ Seviyesi | 7 | |
Sınıflandırma (Tematik Alan) | Tıbbi teşhis ve tedavi teknolojisi | |
Sınıflandırma (Meslek Kodu) | - | |
Kategori | Ana | |
Kredi Değeri | 120 | |
Programın Normal Süresi | 2 | |
Program Profili (Amaç) | - | |
Öğrenme Ortamları | - | |
Öğrenme Kazanımları (Tanım) |
| |
Anahtar Yetkinlikler | - | |
Ölçme ve Değerlendirme Yöntemleri | - | |
Kalite Güvencesi | - | |
Giriş Şartı | - | |
Başarma Şartları | Program toplam 21 yerel krediden az olmamak koşuluyla en az yedi adet ders, bir seminer dersi ve tez çalışmasından oluşur. Yüksek lisans öğrenim programı zorunlu ve seçmeli derslerden oluşur. Programın toplam AKTS kredisi 120dir. | |
İlerleme Yolları (İlişki Türü) | Biyomühendislik Bölümü yüksek lisans programlarını tamamlayan öğrencilerimiz yurtiçi ve yurtdışı akademik kariyer olanakları bulunmaktadır. Ayrıca özel şirketlerde çalışma fırsatları yakalamışlardır. | |
Yasal Dayanağı | - | |
Geçerlilik Süresi (Varsa) | Yeterlilik sürekli geçerlidir. | |
Yeterliliğe Erişim için İnternet Adresi | Adresi Aç |
TR0030008814
- Biyomühendislik ve Biyoteknoloji alanlarında, lisans yeterliliklerine dayalı olarak bilgilerini uzmanlık düzeyinde geliştirebilme.
- Biyomühendislik alanındaki mühendislik problemlerini tanımlama, modelleme ve çözme becerisini daha üst düzeyde geliştirebilmeİleri mühendislik uygulamaları için güncel teknikleri ve hesaplama araçlarını kullanabilme.
- Biyomühendislik alanında uzmanlık gerektiren sorunları bilimsel araştırma yöntemlerini kullanarak çözümleyebilme.
- Biyomühendislik ve Biyoteknoloji alanındaki bir soruna yönelik deney kurgulayabilme, çözüm yöntemi geliştirebilme, çözebilme, sonuçları değerlendirebilme ve sentez becerisine sahip olabilme.
- Biyomühendislik alanındaki bilimsel çalışma sonuçlarını Ulusal ve Evrensel gelişmelere aktarabilme ve öncülük edebilme.
- Ulusal gereksinimlere öncelik verebilme ve bu konulardaki gelişmeleri yakından izleyebilme.
- Biyomühendislik ve Biyoteknoloji alanında bilimsel yenilik meydana getirebilme, yeni bir bilimsel yöntem geliştirebilme ya da bilinen bir yöntemi uygulayarak yayınlanabilir özgün bir çalışmayı ortaya koyabilme.
- Günümüz toplumumuzun farklı boyut ve sektörlerdeki sorunlarına çevre bilinci ile sürdürülebilir süreçler kapsamında özgün çözümler sunabilme.
- Yaratıcı ve eleştirel düşünme, inisiyatif kullanabilme ve karar verme gibi üst düzey zihinsel süreçleri kullanarak araştırıcı, üretici ve girişimci kapasiteye sahip olabilme.
- Çağdaş, yenilikçi, katılımcı olabilme, kendini iyi ifade edebilme ve kalite ve kalite yönetimi konularında bilinç sahibi olabilme.
- Disipliniçi ve disiplinlerarası iletişim kurabilme, çok disiplinli ekiplerle çalışabilme, özgün ve disiplinlerarası sorunların çözümlenmesinde liderlik yapabilme.
- Mesleki ve toplumsal etik değerlere sahip olabilme.
Biyomühendislik Bölümü yüksek lisans programlarını tamamlayan öğrencilerimiz yurtiçi ve yurtdışı akademik kariyer olanakları bulunmaktadır. Ayrıca özel şirketlerde çalışma fırsatları yakalamışlardır.
Yeterlilik sürekli geçerlidir.
Qualification Code | TR0030008814 | |
Qualification Title | ||
Awarding Body | Tokat Gaziosmanpaşa University | |
Awarding Body Contact | Responsible Institution Contact Information Tokat Gaziosmanpaşa University, Taşlıçiftlik Campus, 60250 Tokat | |
Awarding Body Url | http://www.gop.edu.tr | |
Orientation | Academic | |
EQF Level | 7 | The Qualification hasn't been included in TQF. |
TQF Level | 7 | |
Thematic Areas | Medical diagnostic and treatment technology | |
National Occupation Classification | - | |
Category | Main | |
Credit Value | - | |
Program Duration | - | |
Program Profile | - | |
Learning Environments | - | |
Description |
| |
Key Competencies | - | |
Further Info |
| |
Quality Assurance | - | |
Access Requirements | The applicants who hold a Bachelors Degree and willing to enroll in the Masters programme may apply to the Directorate of the Graduate School with the documents: 1-Sufficient score (at least 55 out of 100) from the Academic Staff and Graduate Study Education Exam (ALES) conducted by Student Selection and Placement Center (OSYM) or GRE Graduate Record Examination (GRE) score or Graduate Management Admission Test (GMAT) score equivalent to ALES score of 55. 2-English proficiency (at least 70 out of 100 from the Profiency Exam conducted by Ege University Foreign Language Department, or at least 50 out of 100 from ÜDS (University Language Examination conducted by OSYM) or TOEFL or IELTS score equivalent to UDS score of 50. The assessment for admission to masters programs is based on : 50% of ALES, 25% of academic success in the undergraduate programme (cumulative grade point average (CGPA) ) and 25% of interview grade. The required minimum interview grade is 50 out of 100. The candidates having an assessed score of 60 at least are accepted into the Masters programme. The results of the evaluation are announced by the Directorate of Graduate School. | |
Conditions for Success | The programme consists of a minimum of seven courses delivered within the graduate programme of the department and in related fields, one seminar course, and thesis, with a minimum of 21 local credits. The seminar course and thesis are non-credit and graded on a pass/fail basis. The duration of the programme is four semesters. The maximum period to complete course work in a masters program with thesis is 4 semesters. However, with the approval of their advisors, students can in subsequent semesters take additional departmental courses with or without credits. The total ECTS credits of the programme is 120 ECTS. A student may take undergraduate courses on the condition that the courses have not been taken during the undergraduate program. However, at most two of these courses may be counted to the Masters course load and credits. Students must register for thesis work and the Specialization Field course offered by his supervisor every semester following the semester, in which the supervisor is appointed. A student who has completed work on the thesis within the time period, must write a thesis, using the data collected, according to the specifications of the Graduate School Thesis Writing Guide. The thesis must be defended in front of a jury. The Masters thesis jury is appointed on the recommendations of the relevant Department Chairperson and with the approval of the Administrative Committee of the Graduate School. The jury is composed of the thesis supervisor and 3 to 5 faculty members. Of the appointed jury members, up to one may be selected from another Department or another University. In case the jury consists of 3 members, the co-supervisor cannot be the jury member. A majority vote by the jury members determines the outcome of the thesis or examination. The vote can be for acceptance , rejection or correction . The Department Chairperson will inform the Director of the Graduate School, in writing, of the jurys decision within 3 days. To correct or change a thesis found incomplete and/or inadequate by the jury, the jury must specify in its report that such corrections are necessary. A student may be given, by a decision of the Administrative Committee of the Graduate School, up to three months to complete the corrections. The student must then retake the thesis examination.Graduation requirements are explained in the section “Qualification Requirements and Regulations” . | |
Progression Paths (Relationship Type) | Our students who have completed the Masters program in Bioengineering have both domestic and international academic career opportunities. They also had opportunities to work in private companies. | |
Legal Basis | - | |
Validity Period (If Any) | Qualification is continuous | |
Url | Open Address |
TR0030008814
- Gaining more expertise in the fields of Bioengineering and Biotechnology.
- Developing skills on a more advanced level in identifying, modeling and solving engineering problems in bioengineeringUsing up-to-date techniques and tools for advanced engineering applications
- Solving problems requiring expertise in the field of Bioengineering using scientific research methodologies
- Possessing skills in designing an experiment, evaluating and synthesizing the data and the results
- Pioneering the interpretation and transfer of scientific findings into national and international developments
- Prioritizing national requirements and close monitoring of developments
- Capable of making scientific innovations in the field of Bioengineering and Biotechnology, developing new techniques applying existing techniques to new areas and publishing.
- Presenting innovative and environmental-friendly solutions to the problems encountered in various sectors
- Research oriented, productive and entrepreneur spirit by gaining the ability to use cognitive processes such as innovative thinking, initiative taking and decision making
- Contemporary, innovative, participative, self-descriptive and conscious about quality related issues
- Multidisciplinary communication, team building and leadershipPossessing occupational and social ethics
- Students are required to take a mid-term examination and/or complete other assigned projects/homework during the semester and, additionally, are required to take a final examination and/or complete a final project for course evaluation.
- The final grade is based on the mid-term examination grade, the final examination grade and/or evaluation of final project, with the contributions of 40% and 60%, respectively.
- To pass any course, a Masters student must receive at least 70 out of 100. Students must repeat courses they have failed or may substitute courses the Department accepts as equivalent.
- The assessment for each course is described in detail in “Individual Course Description”The programme consists of a minimum of seven courses delivered within the graduate programme of the department and in related fields, one seminar course, and thesis, with a minimum of 21 local credits.
- The seminar course and thesis are non-credit and graded on a pass/fail basis.
- The duration of the programme is four semesters.
- The maximum period to complete course work in a masters program with thesis is 4 semesters.
- However, with the approval of their advisors, students can in subsequent semesters take additional departmental courses with or without credits.
- The total ECTS credits of the programme is 120 ECTS.
- A student may take undergraduate courses on the condition that the courses have not been taken during the undergraduate program. However, at most two of these courses may be counted to the Masters course load and credits.
- Students must register for thesis work and the Specialization Field course offered by his supervisor every semester following the semester, in which the supervisor is appointed.
- A student who has completed work on the thesis within the time period, must write a thesis, using the data collected, according to the specifications of the Graduate School Thesis Writing Guide.
- The thesis must be defended in front of a jury.
- The Masters thesis jury is appointed on the recommendations of the relevant Department Chairperson and with the approval of the Administrative Committee of the Graduate School.
- The jury is composed of the thesis supervisor and 3 to 5 faculty members.
- Of the appointed jury members, up to one may be selected from another Department or another University. In case the jury consists of 3 members, the co-supervisor cannot be the jury member.
- A majority vote by the jury members determines the outcome of the thesis or examination.
- The vote can be for acceptance , rejection or correction .
- The Department Chairperson will inform the Director of the Graduate School, in writing, of the jurys decision within 3 days.
- To correct or change a thesis found incomplete and/or inadequate by the jury, the jury must specify in its report that such corrections are necessary.
- A student may be given, by a decision of the Administrative Committee of the Graduate School, up to three months to complete the corrections.
- The student must then retake the thesis examination.
The applicants who hold a Bachelors Degree and willing to enroll in the Masters programme may apply to the Directorate of the Graduate School with the documents: 1-Sufficient score (at least 55 out of 100) from the Academic Staff and Graduate Study Education Exam (ALES) conducted by Student Selection and Placement Center (OSYM) or GRE Graduate Record Examination (GRE) score or Graduate Management Admission Test (GMAT) score equivalent to ALES score of 55. 2-English proficiency (at least 70 out of 100 from the Profiency Exam conducted by Ege University Foreign Language Department, or at least 50 out of 100 from ÜDS (University Language Examination conducted by OSYM) or TOEFL or IELTS score equivalent to UDS score of 50. The assessment for admission to masters programs is based on : 50% of ALES, 25% of academic success in the undergraduate programme (cumulative grade point average (CGPA) ) and 25% of interview grade. The required minimum interview grade is 50 out of 100. The candidates having an assessed score of 60 at least are accepted into the Masters programme. The results of the evaluation are announced by the Directorate of Graduate School.
Our students who have completed the Masters program in Bioengineering have both domestic and international academic career opportunities. They also had opportunities to work in private companies.
Qualification is continuous