Yeterlilik Kodu

TR0030004989

Yeterlilik Adı
Çevre Mühendisliği Tezli Yüksek Lisans Diploması
Sorumlu KurumKahramanmaraş Sütçü İmam Üniversitesi
Sorumlu Kurum İletişim BilgisiKahramanmaraş Sütçü İmam Üniversitesi Rektörlüğü, Avşar Yerleşkesi Batı Çevreyolu Blv. No: 251/A 46050 - Onikişubat /Kahramanmaraş
Sorumlu Kurum URLhttp://www.ksu.edu.tr
Yönelim-
AYÇ Seviyesi7
Yeterlilik TYÇ’ye yerleştirilmemiştir.
TYÇ Seviyesi 7
Sınıflandırma (Tematik Alan)Çevre bilimleri
Sınıflandırma (Meslek Kodu) -
Kategori-
Kredi Değeri-
Programın Normal Süresi -
Program Profili (Amaç)-
Öğrenme Ortamları-
Öğrenme Kazanımları (Tanım)
  • Çevre Mühendisliği alanında bilimsel araştırma yaparak bilgiye genişlemesine ve derinlemesine ulaşır, bilgiyi değerlendirir, yorumlar ve uygularÇevre Mühendisliğinde uygulanan güncel teknik ve yöntemler ile bunların kısıtları hakkında kapsamlı bilgi sahibidir.
  • Sınırlı yada eksik verileri kullanarak bilimsel yöntemlerle bilgiyi tamamlayabilme ve uygulayabilme becerisi.
  • Yeni ve/veya özgün fikir ve yöntemler geliştirme; sistem, parça veya süreç tasarımlarında yenilikçi çözümler geliştirme becerisi.
  • Analitik, modele dayalı ve deneysel esaslı araştırmaları tasarlama ve uygulama; bu süreçte karşılaşılan karmaşık durumları çözümleme ve yorumlama becerisi.
  • Çevre Mühendisliği problemlerini kurgulama, çözmek için yöntem geliştirme ve çözümlerde yenilikçi yöntemler uygulama becerisi
Anahtar Yetkinlikler -
Ölçme ve Değerlendirme Yöntemleri
  • ÇEVRE MÜHENDİSLİĞİ YÜKSEK LİSANS DERECESİ, Genel Akademik Not Ortalaması (GANO) 2.5/4.00’den az olmayan, tezini başarıyla savunmuş olan ve programdaki tüm derslerini (120 AKTS) en az CB ya da S notuyla geçmiş olan öğrencilere verilmektedir.
  • ÇEVRE MÜHENDİSLİĞİ programı süresince öngörülen program öğrenme çıktılarının elde edilip edilmediğini ölçmek için kullanılan yöntemler aşağıda belirtilmiştir.
  • Ders üniteleri ile ilgili çıktılar ise ders tanımının yer aldığı kısımda final notlarına sağladığı katkı ile birlikte gösterilmiştir.
  • -Ara Sınav-Final Sınavı-Telafi Sınavı-Rapor Sunma-Bilgisayarla Sunum Yapma-Tez Sunma-Belge SunmaAra sınav ve final sınavları üniversite tarafından belirlenen ve ilan edilen tarih, yer ve zamanlarda yapılır.
  • Öğrencilerin dönem sonu notları; ara sınav, final sınavı sonuçlarına dayanarak öğrencilerin devam şartını sağlamasını da dikkate alınarak öğretim elemanları tarafından verilir.
  • Dönem sonu notunun belirlenmesinde dönem içi faaliyetlerinin katkısı % 40 ve final sınavının katkısı yönetmelikle belirlenen tüm lisansüstü programlarındaki tüm dersler için % 60’dır.3.00-3.49 GANO’ya sahip olan öğrenci başarılı olarak nitelendirilir.
Kalite Güvencesi-
Giriş Şartı

(1) Üniversiteye bağlı birimlere kayıt için aşağıdaki şartlar aranır:Kabul koşullarına Türkiye Yükseköğretim Kurulu’nun belirlediği yönetmeliklere uygun olarak karar verilmektedir. Lisansüstü programlarına başvuru ve kabul için gerekli koşullar hakkındaki bilgi, her akademik yılın başında üniversitenin web sayfasında duyurulur. Aşağıdaki koşullar hem Türk hem deyabancı uyruklu öğrenciler için geçerlidir:-Çevre Mühendisliği’nde lisans derecesi sahibi olmak-Sayısal puan türünden, ALES’ten en az 60 puan veya GRE sınavından eşdeğer puanı almışolmaları-Lisans öğrenimlerini yurt dışında yapan adayların Yükseköğretim Kurulundan alınan denklikbelgesine sahip olmaları gerekir.

Başarma Şartları3.00-3.49 GANO’ya sahip olan öğrenci başarılı olarak nitelendirilir. -Geçer not alarak en az 120 AKTS kredisini tamamlamak (7 ders için toplam 56 AKTS kredisi ve 21 kredi; bir Seminer Dersi için 6 AKTS kredisi; Tez Çalışması (Tez Önerisi) için 2 AKTS kredisi, üç yarıyıl alınan Özel Konular dersleri için toplam 6 AKTS kredisi ve iki yarıyıl alınan Tez Çalışması için toplam 60 AKTS kredisi olmak üzere)-Tezini hazırlayıp başarıyla sunmak
İlerleme Yolları (İlişki Türü)

-Mezunlarımız özel sektörde, AR-GE yapan ensitülerde, kamuda ve üniversitelerde Çevre Mühendisi olarak istihdam edilirler. -İnsan faaliyeti ile oluşan her türlü çevresel problemlerin çözümünden ve denetiminden sorumlu belediyeler, il özel idareleri, iller bankası, çevre ve şehircilik bakanlığı, orman ve su işleri bakanlığı gibi kamu kuruluşlarında,-Atık su, katı atık ve hava kirliliği oluşturan ve bu konularda çözüme ihtiyaç duyan çok çeşitli sanayi kuruluşlarında,-Arıtma sistemleri üreten ve/veya bu alanda teknoloji geliştiren özel sektörlerde, arıtma teknolojisi kuruluşlarında, çeşitli alanlarda ve kademelerinde,-Dünyanın karşı karşıya olduğu küresel ısınma, hava kirliliği, su kirliliği, katı atık kirliliği gibi pek çok çevre problemlerinin çözümü için geliştirilen çevre standartlarına uymakla yükümlü endüstri ve tarım sektörlerinde,-Çeşitli sektörlerde iş güvenliği uzmanı, çevre görevlisi ve saha görevlisi gibi pozisyonlarda istihdam edilmektedir.Ayrıca, Türkiye ve yurtdışındaki üniversitelerde ilgili yüksek lisans ve doktora programlarına kayıt olarakakademik kariyer de yapabilirler.

Yasal Dayanağı-
Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir

Yeterliliğe Erişim için İnternet Adresi Adresi Aç
Yeterlilik Kodu

TR0030004989


Yeterlilik Adı
Çevre Mühendisliği Tezli Yüksek Lisans Diploması

Sorumlu Kurum
Kahramanmaraş Sütçü İmam Üniversitesi

Sorumlu Kurum İletişim Bilgisi
Kahramanmaraş Sütçü İmam Üniversitesi Rektörlüğü, Avşar Yerleşkesi Batı Çevreyolu Blv. No: 251/A 46050 - Onikişubat /Kahramanmaraş

Sorumlu Kurum URL

Yönelim
-

Sınıflandırma (Meslek Kodu)
-

AYÇ Seviyesi
7

TYÇ Seviyesi
7
Yeterlilik TYÇ’ye yerleştirilmemiştir.

Sınıflandırma (Meslek Kodu)
-

Kategori
-

Kredi Değeri
-

Programın Normal Süresi
-

Program Profili (Amaç)
-

Öğrenme Ortamları
-

Öğrenme Kazanımları (Tanım)
  • Çevre Mühendisliği alanında bilimsel araştırma yaparak bilgiye genişlemesine ve derinlemesine ulaşır, bilgiyi değerlendirir, yorumlar ve uygularÇevre Mühendisliğinde uygulanan güncel teknik ve yöntemler ile bunların kısıtları hakkında kapsamlı bilgi sahibidir.
  • Sınırlı yada eksik verileri kullanarak bilimsel yöntemlerle bilgiyi tamamlayabilme ve uygulayabilme becerisi.
  • Yeni ve/veya özgün fikir ve yöntemler geliştirme; sistem, parça veya süreç tasarımlarında yenilikçi çözümler geliştirme becerisi.
  • Analitik, modele dayalı ve deneysel esaslı araştırmaları tasarlama ve uygulama; bu süreçte karşılaşılan karmaşık durumları çözümleme ve yorumlama becerisi.
  • Çevre Mühendisliği problemlerini kurgulama, çözmek için yöntem geliştirme ve çözümlerde yenilikçi yöntemler uygulama becerisi

Anahtar Yetkinlikler
-

Ölçme ve Değerlendirme Yöntemleri
  • ÇEVRE MÜHENDİSLİĞİ YÜKSEK LİSANS DERECESİ, Genel Akademik Not Ortalaması (GANO) 2.5/4.00’den az olmayan, tezini başarıyla savunmuş olan ve programdaki tüm derslerini (120 AKTS) en az CB ya da S notuyla geçmiş olan öğrencilere verilmektedir.
  • ÇEVRE MÜHENDİSLİĞİ programı süresince öngörülen program öğrenme çıktılarının elde edilip edilmediğini ölçmek için kullanılan yöntemler aşağıda belirtilmiştir.
  • Ders üniteleri ile ilgili çıktılar ise ders tanımının yer aldığı kısımda final notlarına sağladığı katkı ile birlikte gösterilmiştir.
  • -Ara Sınav-Final Sınavı-Telafi Sınavı-Rapor Sunma-Bilgisayarla Sunum Yapma-Tez Sunma-Belge SunmaAra sınav ve final sınavları üniversite tarafından belirlenen ve ilan edilen tarih, yer ve zamanlarda yapılır.
  • Öğrencilerin dönem sonu notları; ara sınav, final sınavı sonuçlarına dayanarak öğrencilerin devam şartını sağlamasını da dikkate alınarak öğretim elemanları tarafından verilir.
  • Dönem sonu notunun belirlenmesinde dönem içi faaliyetlerinin katkısı % 40 ve final sınavının katkısı yönetmelikle belirlenen tüm lisansüstü programlarındaki tüm dersler için % 60’dır.3.00-3.49 GANO’ya sahip olan öğrenci başarılı olarak nitelendirilir.

Kalite Güvencesi
-

Giriş Şartı

(1) Üniversiteye bağlı birimlere kayıt için aşağıdaki şartlar aranır:Kabul koşullarına Türkiye Yükseköğretim Kurulu’nun belirlediği yönetmeliklere uygun olarak karar verilmektedir. Lisansüstü programlarına başvuru ve kabul için gerekli koşullar hakkındaki bilgi, her akademik yılın başında üniversitenin web sayfasında duyurulur. Aşağıdaki koşullar hem Türk hem deyabancı uyruklu öğrenciler için geçerlidir:-Çevre Mühendisliği’nde lisans derecesi sahibi olmak-Sayısal puan türünden, ALES’ten en az 60 puan veya GRE sınavından eşdeğer puanı almışolmaları-Lisans öğrenimlerini yurt dışında yapan adayların Yükseköğretim Kurulundan alınan denklikbelgesine sahip olmaları gerekir.


Başarma Şartları
3.00-3.49 GANO’ya sahip olan öğrenci başarılı olarak nitelendirilir. -Geçer not alarak en az 120 AKTS kredisini tamamlamak (7 ders için toplam 56 AKTS kredisi ve 21 kredi; bir Seminer Dersi için 6 AKTS kredisi; Tez Çalışması (Tez Önerisi) için 2 AKTS kredisi, üç yarıyıl alınan Özel Konular dersleri için toplam 6 AKTS kredisi ve iki yarıyıl alınan Tez Çalışması için toplam 60 AKTS kredisi olmak üzere)-Tezini hazırlayıp başarıyla sunmak

İlerleme Yolları (İlişki Türü)

-Mezunlarımız özel sektörde, AR-GE yapan ensitülerde, kamuda ve üniversitelerde Çevre Mühendisi olarak istihdam edilirler. -İnsan faaliyeti ile oluşan her türlü çevresel problemlerin çözümünden ve denetiminden sorumlu belediyeler, il özel idareleri, iller bankası, çevre ve şehircilik bakanlığı, orman ve su işleri bakanlığı gibi kamu kuruluşlarında,-Atık su, katı atık ve hava kirliliği oluşturan ve bu konularda çözüme ihtiyaç duyan çok çeşitli sanayi kuruluşlarında,-Arıtma sistemleri üreten ve/veya bu alanda teknoloji geliştiren özel sektörlerde, arıtma teknolojisi kuruluşlarında, çeşitli alanlarda ve kademelerinde,-Dünyanın karşı karşıya olduğu küresel ısınma, hava kirliliği, su kirliliği, katı atık kirliliği gibi pek çok çevre problemlerinin çözümü için geliştirilen çevre standartlarına uymakla yükümlü endüstri ve tarım sektörlerinde,-Çeşitli sektörlerde iş güvenliği uzmanı, çevre görevlisi ve saha görevlisi gibi pozisyonlarda istihdam edilmektedir.Ayrıca, Türkiye ve yurtdışındaki üniversitelerde ilgili yüksek lisans ve doktora programlarına kayıt olarakakademik kariyer de yapabilirler.


Yasal Dayanağı
-

Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir


Yeterliliğe Erişim için İnternet Adresi
Adresi Aç

Qualification Code

TR0030004989

Qualification Title
Master Diploma with Thesis in Environmental Engineering
Awarding BodyKahramanmaraş Sütçü İmam University
Awarding Body Contact
Awarding Body Urlhttp://www.ksu.edu.tr
Orientation-
EQF Level7
The Qualification hasn't been included in TQF.
TQF Level 7
Thematic AreasEnvironmental sciences
National Occupation Classification -
Category-
Credit Value-
Program Duration-
Program Profile-
Learning EnvironmentsStudents with 3.00-3.49 GANO are considered successful.-Getting a minimum of 120 ECTS credits by taking the final note (for a total of 56 ECTS credits and 21 credits for 7 courses, 6 ECTS credits for a seminar course, 2 ECTS credits for a thesis study (Thesis proposal), 3 semesters for special subjects courses in total 6 ECTS credits and 60 ECTS credits for the thesis study taken in two semesters)-To prepare and present successfull.
Description Reaches the knowledge in-depth by doing scientific research in Environmental Engineering and evaluate, interpret and apply information. Have comprehensive knowledge about current techniques and methods and their limitations in Environmental Engineering. Ability to complete and apply knowledge through scientific methods using limited or incomplete data. Developing new and / or original ideas and methods; ability to develop innovative solutions in system, component or process design. Designing and implementing analytical, model based and experimental based researches; the ability to analyze and interpret complex situations encountered in this process. Ability to design environmental engineering problems, develop methods to solve them and apply innovative methods in solutions .
Key Competencies-
Further Info MASTER OF ENVIRONMENTAL ENGINEERING MASTERS DEGREE, General Academic Grade Point Average (CGPA) is given to students who are not less than 2.5 / 4.00, who have successfully defended their thesis and have passed all courses in the program (120 ECTS) with at least CB or S grade. The methods used to measure whether the program learning outcomes foreseen during the ENVIRONMENTAL ENGINEERING program have been obtained are given below. The outputs related to the course units are shown together with the contribution to the final grades. -Midterm-Final exam-The Exam-Reporting-Computer Presentation-Theme PresentationPresentationsMid-term and final exams are conducted at the dates, places and times determined and announced by the university. Students grades at the end of the semester; Based on the results of the mid-term and final exams, it is given to the students by taking into consideration the continuation of the attendance requirement. The contribution of the semester activities is 40% and the contribution of the final exam is 60% for all courses in all graduate programs determined by the regulation. Students with 3.00-3.49 GANO are considered successful.
Quality Assurance-
Access Requirements(1) The following conditions are required for registration to the units affiliated to the University:Turkey has decided to accept the terms in accordance with the regulations set by the Higher Education Council. Information on the requirements for admission and admission to graduate programs is announced on the universitys web site at the beginning of each academic year. The following conditions are both Turkish andapplies to foreign students:- To have a Bachelors degree in Environmental Engineering- score of 60 points from ALES or equivalent score from GREthere are-The equivalence of the candidates who made their undergraduate studies abroadthey must have the certificate.
Conditions for SuccessStudents with 3.00-3.49 GANO are considered successful.-Getting a minimum of 120 ECTS credits by taking the final note (for a total of 56 ECTS credits and 21 credits for 7 courses, 6 ECTS credits for a seminar course, 2 ECTS credits for a thesis study (Thesis proposal), 3 semesters for special subjects courses in total 6 ECTS credits and 60 ECTS credits for the thesis study taken in two semesters)-To prepare and present successfully
Progression Paths (Relationship Type)- Our graduates are employed in the private sector, in the R & D engaged communities, in the public and in universities as Environmental Engineers.- in public institutions such as municipalities, provincial special administrations, provincial banks, ministry of environment and urbanization, Ministry of Forestry and Water Affairs, responsible for the solution and control of all environmental problems caused by human activity,-In a wide range of industrial establishments that produce waste water, solid waste and air pollution and need solutions in these matters,-In special sectors, producing technology and / or developing technology in refining systems,- In the industrial and agricultural sectors, which are responsible for complying with environmental standards developed for the solution of many environmental problems such as global warming, air pollution, water pollution and solid waste pollution,-In various sectors are employed in positions such as occupational safety expert, environmental officer and field officer.In addition, universities in Turkey and abroad as records related masters and doctoral programsthey can also make an academic career.
Legal Basis-
Validity Period (If Any)

Qualification is continuous

Url Open Address
Qualification Code

TR0030004989


Qualification Title
Master Diploma with Thesis in Environmental Engineering

Awarding Body
Kahramanmaraş Sütçü İmam University

Awarding Body Contact

Awarding Body Url

Orientation
-

National Occupation Classification
-

EQF Level
7

TQF Level
7
The Qualification hasn't been included in TQF.

National Occupation Classification
-

Category
-

Credit Value
-

Program Duration
-

Program Profile
-

Learning Environments
Students with 3.00-3.49 GANO are considered successful.-Getting a minimum of 120 ECTS credits by taking the final note (for a total of 56 ECTS credits and 21 credits for 7 courses, 6 ECTS credits for a seminar course, 2 ECTS credits for a thesis study (Thesis proposal), 3 semesters for special subjects courses in total 6 ECTS credits and 60 ECTS credits for the thesis study taken in two semesters)-To prepare and present successfull.

Description
Reaches the knowledge in-depth by doing scientific research in Environmental Engineering and evaluate, interpret and apply information. Have comprehensive knowledge about current techniques and methods and their limitations in Environmental Engineering. Ability to complete and apply knowledge through scientific methods using limited or incomplete data. Developing new and / or original ideas and methods; ability to develop innovative solutions in system, component or process design. Designing and implementing analytical, model based and experimental based researches; the ability to analyze and interpret complex situations encountered in this process. Ability to design environmental engineering problems, develop methods to solve them and apply innovative methods in solutions .

Key Competencies
-

Further Info
MASTER OF ENVIRONMENTAL ENGINEERING MASTERS DEGREE, General Academic Grade Point Average (CGPA) is given to students who are not less than 2.5 / 4.00, who have successfully defended their thesis and have passed all courses in the program (120 ECTS) with at least CB or S grade. The methods used to measure whether the program learning outcomes foreseen during the ENVIRONMENTAL ENGINEERING program have been obtained are given below. The outputs related to the course units are shown together with the contribution to the final grades. -Midterm-Final exam-The Exam-Reporting-Computer Presentation-Theme PresentationPresentationsMid-term and final exams are conducted at the dates, places and times determined and announced by the university. Students grades at the end of the semester; Based on the results of the mid-term and final exams, it is given to the students by taking into consideration the continuation of the attendance requirement. The contribution of the semester activities is 40% and the contribution of the final exam is 60% for all courses in all graduate programs determined by the regulation. Students with 3.00-3.49 GANO are considered successful.

Quality Assurance
-

Access Requirements
(1) The following conditions are required for registration to the units affiliated to the University:Turkey has decided to accept the terms in accordance with the regulations set by the Higher Education Council. Information on the requirements for admission and admission to graduate programs is announced on the universitys web site at the beginning of each academic year. The following conditions are both Turkish andapplies to foreign students:- To have a Bachelors degree in Environmental Engineering- score of 60 points from ALES or equivalent score from GREthere are-The equivalence of the candidates who made their undergraduate studies abroadthey must have the certificate.

Conditions for Success
Students with 3.00-3.49 GANO are considered successful.-Getting a minimum of 120 ECTS credits by taking the final note (for a total of 56 ECTS credits and 21 credits for 7 courses, 6 ECTS credits for a seminar course, 2 ECTS credits for a thesis study (Thesis proposal), 3 semesters for special subjects courses in total 6 ECTS credits and 60 ECTS credits for the thesis study taken in two semesters)-To prepare and present successfully

Progression Paths (Relationship Type)
- Our graduates are employed in the private sector, in the R & D engaged communities, in the public and in universities as Environmental Engineers.- in public institutions such as municipalities, provincial special administrations, provincial banks, ministry of environment and urbanization, Ministry of Forestry and Water Affairs, responsible for the solution and control of all environmental problems caused by human activity,-In a wide range of industrial establishments that produce waste water, solid waste and air pollution and need solutions in these matters,-In special sectors, producing technology and / or developing technology in refining systems,- In the industrial and agricultural sectors, which are responsible for complying with environmental standards developed for the solution of many environmental problems such as global warming, air pollution, water pollution and solid waste pollution,-In various sectors are employed in positions such as occupational safety expert, environmental officer and field officer.In addition, universities in Turkey and abroad as records related masters and doctoral programsthey can also make an academic career.

Legal Basis
-

Validity Period (If Any)

Qualification is continuous


Url
Open Address