Doğal Gaz Polietilen Boru Kaynakçısı Seviye 4 MYK Mesleki Yeterlilik Belgesi

ISCO 08: 7212

ISCO 08: 7212

With the development of the natural gas industry in our country, welding polyethylene pipes (joining natural gas polyethylene pipes with a nominal diameter of 315 mm and below with electrofusion welding on a gas line, joining saddle support to a natural gas polyethylene pipe with electrofusion welding on a gas line, joining a saddle support on a gaseous line with electrofusion welding with a nominal diameter of 315 mm. The purpose of this qualification is to meet the need for qualified workforce that can provide quality and safety in the sector that commissions, commissions, maintains and repairs natural gas polyethylene pipes;

• To define the qualifications, knowledge, skills and competencies that candidates should have,
• To allow candidates to prove their professional competence with a valid and reliable document,
• To create references and resources for the education system, examination and certification bodies.

The learning outcomes of this qualification can be acquired in formal and non-formal learning environments such as educational institutions, as well as independently in on-the-job and free learning environments.

The person with this qualification;

• Explain occupational health and safety and environmental safety measures.
• Defines the legal and workplace rules on occupational health and safety.
• It describes reducing the risk factors related to occupational health and safety.
• Describes applying emergency procedures in case of danger.
• Describes the reduction of environmental risks.
• Explains the quality requirements for business processes and working environment.
• It describes the studies to eliminate the errors and malfunctions detected in the processes.
• Defines the appropriate workspace properties for the job.
• Explains general professional information about Plastic Resources. (TS EN 13067 Article 5.3).
• Describes the operation and monitoring of welding equipment.
• Describes the properties of subgroups of thermoplastics.
• It describes the welding process.
• It describes the welding processes.
• Describes the preparation of welding materials and equipment.
• It describes the welding process.
• It describes how to control the welding process.
• It defines the destructive and non-destructive tests required for the applied welding processes.
• Welding does the preparatory work.
• It performs the bypass operation.
• It degass the line.
• It does the welding work.
• Describes the ambient conditions suitable for polyethylene welding.
• Digs polyethylene pipes.
• Cleans polyethylene pipes and fittings.
• Marks on polyethylene pipe.
• Performs polyethylene pipe assembly operations.
• It provides the cooling conditions of the welding zone.
• Describes the control of the welding process.
• Complies with OHS, environmental and quality requirements.
• Complies with OHS rules in the works it performs.
• Applies quality requirements in the works it performs.
• Applies environmental protection requirements in the works it performs.
• It does the welding.
• It does the welding.
• It cools the welding area.
• It controls the welding process.
• Performs tightness test after welding.

This qualification aims to document professional learning outcomes and does not contain key competences.

Orientation: Vocational

Category: Special Purposes

Candidates who want to achieve this qualification are subjected to theoretical and performance-based exams defined in the units.

Theoretical and performance-based exams in the qualification units can be done separately for each unit or together. However, each unit is evaluated independently.

In the theoretical exams, candidates are given a 4-option multiple-choice exam with at least ten (10) questions, each of which is worth equal points. In the exam, candidates are given 1-2 minutes for each question.

All skills and competencies are measured by a performance-based exam. The candidate's performance test must be carried out with test pieces suitable for SDR ≤ 17.6 with a nominal diameter between 63 mm and 125 mm and a branch diameter of less than 63 mm. The welding sample must meet the acceptance criteria specified in the TS EN 13100-1 standard and the welding and testing processes must be performed on the specified line.

Quality assurance processes are carried out in accordance with the VQA Quality Assurance Document and the Guidelines in its annex.

Establishment and Approval of National Qualifications:

National qualifications developed by institutions and organizations that have the power to represent the sector and profession, and VQA working groups; It is submitted for the opinion of all relevant parties for at least 15 days, verified by VQA Sector Committees and approved by VQA Executive Board. National qualifications are reviewed every five years at the latest, depending on national occupational standards.

Assesment and evaluation:

It is carried out by certification bodies accredited by TURKAK according to ISO/EN 17024 Standard and authorized by VQA in accordance with VQA legislation and conditions and methods defined in national qualifications. Measurement and evaluation activities are carried out in accordance with the pre-determined and announced exam programs. Information on qualification forms, evaluators, measurement and evaluation criteria and methods are included in the exam programs. All measurement and evaluation processes are recorded and stored on camera. Records are kept under the conditions and periods defined in VQA legislation. Measurement and evaluation activities are subject to internal and external verification processes. Evidence of verification activities is shared with the relevant institution, file managers and audit team via VQA Web Portal.

Certification:

VQA Vocational Qualification Certificate is issued to individuals who are determined to be successful by the Authorized Certification Bodies. The activities for the design and printing of VQA Vocational Qualification Certificate are carried out by VQA. Security measures such as data matrix and hologram are applied for VQA Vocational Qualification Certificate, and the accuracy of the documents can be checked on VQA Web Portal. Self-Assessment: Authorized Certification Bodies carry out self-assessment activities every year in accordance with VQA legislation and TS EN ISO / IEC 17024 Accreditation Standard. All corrective and preventive action records and supporting documents are kept and submitted to VQA with a self-assessment report.

External Evaluation:

External evaluation of Authorized Certification Bodies is carried out by TÜRKAK (TS EN) in accordance with ISO/IEC 17024 Standard, and by VQA through programmed and unscheduled audits in accordance with VQA legislation. External evaluation reports are submitted to Authorized Certification Bodies and VQA Board of Directors.

Regular Review:

The external evaluation activities and results of VQA Audit Department are regularly reviewed by VQA Executive Board. In addition, TÜRKAK's external evaluation activities and results are subject to regular review by the European Accreditation Union. Information Management Systems: Authorization, measurement-evaluation, certification, self-assessment and external evaluation processes are carried out through VQA Portal. Feedback Mechanisms: In all processes related to qualification, stakeholder participation is ensured at the highest level and opinions, suggestions, objections and complaints are evaluated in accordance with the legislation.

• There is no entry requirement.

It is the required qualification for this vocation. Persons with this qualification have the opportunity to apply for measurement-evaluation processes for advanced level or professional qualification certificates in the same field, or they can participate in employment in the field of natural gas polyethylene pipe welding.

Vocational Qualifications Authority Law

Regulation on Preparation of National Occupational Standards and National Qualifications

Vocational Qualifications Authority Examination, Measurement, Evaluation and Certification Regulation

Audit Procedures and Principles for Vocational Qualifications Authority Certification Bodies

Qualification certificate is valid for 2 years from the date of issue.

The welder must be committed to maintaining the welding job within the range of qualifications corresponding to the qualification test document. The welder should not interrupt welding work for more than 6 months.