Endüstriyel Boru Montajcisi Seviye 3 MYK Mesleki Yeterlilik Belgesi

ISCO 08: 7126

ISCO 08: 7126

This qualification is for the profession of Industrial Pipe Fitter (Level 3) to be carried out by qualified people and to increase the quality of the profession;

• To define the qualifications, knowledge, skills and competencies that candidates should have,
• To enable candidates to prove their professional competence with a valid and reliable document,
• It has been prepared to create references and resources for certification bodies authorized to the education system.

The learning outcomes of this qualification can be acquired in formal and non-formal learning environments such as educational institutions, as well as independently in on-the-job and free learning environments.

Person with this qualification;

• Explain occupational health and safety and environmental protection measures.
• List the legal and workplace rules on occupational health and safety.
• Explains reducing the risk factors related to occupational health and safety.
• Explains the emergency procedures to be applied in case of danger.
• Sorts the recycling processes.
• Explains the quality requirements.
• List job quality requirements and technical procedures.
• Explains the reporting that should be done on quality.
• It works in accordance with the requirements of OHS, environmental protection and quality management system.
• It carries out its work in accordance with occupational health and safety rules.
• It carries out its work in accordance with environmental protection rules.
• It carries out its work in accordance with quality rules.
• Makes preliminary preparations for mechanical piping.
• Explains the symbols or figures specified in the project.
• Explains the types and properties of pipes and fittings and materials used in mechanical piping.
• Explains the usage areas and methods of tools, equipment and equipment to be used in mechanical piping.
• Prepares installation materials (pipes, support, fitting materials and similar) for assembly.
• Prepares the pipe for assembly.
• Marks the pipes to be cut.
• Cuts the marked pipes.
• It corrects the smoothness of the cut mouth of each cut pipe piece by checking it with a miter.
• Explains the joining methods of pipe and fitting materials.
• Makes mechanical piping.
• Makes the assembly of the console (support) to the place specified in the project with appropriate methods.
• Performs measurement checks before assembly.
• It makes flanged joints.
• Threads the pipe.
• It makes cold bending with a bending machine according to the project.
• Prepares the piping system for testing.
• It ensures that the assembly is completed in accordance with the project.
• Makes the blanks for the test process.
• Puts vents and drains for testing.
• Prepares the test setup.
• He connects the test setup he prepared to its place in the project.
• Prepares for assembly.
• Examines the isometric picture for montage.
• Explains the properties of pipe fittings and materials to be used in assembly according to the information in the material list.
• Prepares tools and equipment.
• Prepares the work area for work.
• It manufactures spools.
• Pipe measurement and marking.
• Cuts the workpiece (pipe).
• Squares the workpiece.
• The weld opens the mouth.
• Drills holes in pipe for Branch and Instrument.
• Explains the method of marking and cutting elbows at angles other than standard manufacturing elbows.
• Explains the mounting techniques of the reinforcement collar
• Assembles the workpieces.
• Explains spool labeling operations.
• Pipe-Support makes assembly.
• It places the supports in their place in the isometry.
• Performs pre-merge check.
• They are ready to weld the job.
• It makes flanged joints.
• Explains pipe threading techniques.
• Explains the situations to be considered in elbow bending.
• Prepares the piping system for testing.
• It checks the conformity of the assembly to the isometry.
• Completes missing materials for testing.
• Performs the blanks specified in the test package.
• Puts the vents and drains specified on the test package.
• Prepares the test setup.
• Connects the test rig to its place in the project.

This qualification aims to document professional learning outcomes and does not contain key competences.

• Orientation: Vocational
• Category: Special Purposes
• Candidates who want to achieve this qualification are subjected to theoretical and performance-based exams defined in the units.
• Theoretical and performance-based exams in the qualification units can be done separately for each unit or together. However, each unit is evaluated independently.
• In the theoretical exam, candidates must have at least twenty-five (25) questions for the A1 unit; At least ten (10) questions for unit B1; For the B2 unit, a written exam with at least twenty (20) questions with 4 options and equal points must be applied. In the exam, candidates are given an average of 1.5 minutes for each question.
• All skills and competencies are measured by a performance-based exam. The duration of the performance-based examination should correspond to the time in actual practice conditions. The performance-based exam is carried out in a real or realistic working environment.

Quality assurance processes are carried out in accordance with the VQA Quality Assurance Document and the Guidelines in its annex.

Establishment and Approval of National Qualifications:

National qualifications developed by institutions and organizations that have the power to represent the sector and profession, and VQA working groups; It is submitted for the opinion of all relevant parties for at least 15 days, verified by VQA Sector Committees and approved by VQA Board of Directors. National qualifications are reviewed every five years at the latest, depending on national occupational standards.

Assesment and evaluation:

It is carried out by certification bodies accredited by TURKAK according to ISO/EN 17024 Standard and authorized by VQA in accordance with VQA legislation and conditions and methods defined in national qualifications. Measurement and evaluation activities are carried out in accordance with the pre-determined and announced exam programs. Information on qualification forms, evaluators, measurement and evaluation criteria and methods are included in the exam programs. All measurement and evaluation processes are recorded and stored on camera. Records are kept under the conditions and periods defined in VQA legislation. Measurement and evaluation activities are subject to internal and external verification processes. Evidence of verification activities is shared with the relevant institution, file managers and audit team via VQA Web Portal.

Certification:

VQA Vocational Qualification Certificate is issued to individuals who are determined to be successful by the Authorized Certification Bodies. The activities for the design and printing of VQA Vocational Qualification Certificate are carried out by VQA. Security measures such as data matrix and hologram are applied for VQA Vocational Qualification Certificate, and the accuracy of the documents can be checked on VQA Web Portal. Self-Assessment: Authorized Certification Bodies carry out self-assessment activities every year in accordance with VQA legislation and TS EN ISO / IEC 17024 Accreditation Standard. All corrective and preventive action records and supporting documents are kept and submitted to VQA with a self-assessment report.

External Evaluation:

External evaluation of Authorized Certification Bodies is carried out by TÜRKAK (TS EN) in accordance with ISO/IEC 17024 Standard, and by VQA through programmed and unscheduled audits in accordance with VQA legislation. External evaluation reports are submitted to Authorized Certification Bodies and VQA Board of Directors.

Regular Review:

The external evaluation activities and results of VQA Audit Department are regularly reviewed by VQA Executive Board. In addition, TÜRKAK's external evaluation activities and results are subject to regular review by the European Accreditation Union. Information Management Systems: Authorization, measurement-evaluation, certification, self-assessment and external evaluation processes are carried out through VQA Portal. Feedback Mechanisms: In all processes related to qualification, stakeholder participation is ensured at the highest level and opinions, suggestions, objections and complaints are evaluated in accordance with the legislation.

Entry condition is not required.

Persons with this qualification have the opportunity to apply for measurement-evaluation processes for professional qualification certificates at advanced levels or in different fields, as well as employment in the field of industrial pipe assembly.

Vocational Qualifications Authority Law

Regulation on Preparation of National Occupational Standards and National Qualifications

Vocational Qualifications Authority Examination, Measurement, Evaluation and Certification Regulation

Audit Procedures and Principles for Vocational Qualifications Authority Certification Bodies

Qualification certificate is valid for 5 years from the date of issue.