Yeterlilik Kodu | TR0030010837 | |
Yeterlilik Adı | İnşaat Teknolojisi Ön Lisans Diploması | |
Sorumlu Kurum | Atatürk Üniversitesi | |
Sorumlu Kurum İletişim Bilgisi | Atatürk Üniversitesi Rektörlüğü Üniversite Mahallesi Prof. Dr. Hikmet Koçak Sokak No : 8 P.K : 25050 Yakutiye / Erzurum | |
Sorumlu Kurum URL | http://www.atauni.edu.tr/ | |
Yönelim | Genel | |
AYÇ Seviyesi | 5 | Yeterlilik TYÇ’ye yerleştirilmemiştir. |
TYÇ Seviyesi | 5 | |
Sınıflandırma (Tematik Alan) | İnşaat ve inşaat mühendisliği | |
Sınıflandırma (Meslek Kodu) | - | |
Kategori | Ana | |
Kredi Değeri | 120 | |
Programın Normal Süresi | 2 | |
Program Profili (Amaç) | - | |
Öğrenme Ortamları | - | |
Öğrenme Kazanımları (Tanım) |
| |
Anahtar Yetkinlikler | - | |
Ölçme ve Değerlendirme Yöntemleri | Bu program ikinci öğretim olarak sunulmaktadır. | |
Kalite Güvencesi | - | |
Giriş Şartı | Atatürk Üniversitesi Erzurum Meslek Yüksekokulu Programlarına lise ve Meslek lisesi mezunu öğrenciler ÖSYM tarafından yapılan sınav sonucunda YGS-1 puan türünde yeterli puanı almış ve özel şartları taşıyan öğrenciler alınmaktadır. | |
Başarma Şartları | Öğrencilerin Atatürk Üniversitesi Erzurum Meslek Yüksekokulundan mezun olabilmeleri için öğretim programında belirtilen dersleri ve kredi saatlerini (minimum 100 ders saati veya 120 AKTS) başarıyla tamamlamaları ve ağırlıklı genel not ortalamasını en az 2.00 düzeyine çıkarmış, 30 iş günü staj çalışmalarında başarılı olmaları gerekmektedir. | |
İlerleme Yolları (İlişki Türü) | İnşaat Teknolojisi programından mezun olan öğrenciler kazandıkları yeterlilik doğrultusunda ; İnşaat sektöründe mal/hizmet üreten, inşaat firmalarında , Mimari bürolarda, şantiyede uygulama yapan firmalarda, KPSS puanına göre veya sözleşmeli taşeron firma elemanı olarak TCK, DSİ, Ulaştırma bakanlığı gibi kamu kurum ve kuruluşlarında istihdam edilirler. Mezun öğrencilerimizden bazıları ise, lisans ve yüksek lisans seviyesinde eğitimlerine devam edebilmekte ve öğretim üyesi olarak çeşitli yükseköğrenim kurumlarında çalışmaktadırlar. | |
Yasal Dayanağı | - | |
Geçerlilik Süresi (Varsa) | Yeterlilik sürekli geçerlidir. | |
Yeterliliğe Erişim için İnternet Adresi | Adresi Aç |
TR0030010837
- Yapı teknolojileri alanındaki teknik kavramları, fikirleri ve verileri bilimsel yöntemlerle değerlendirmek, seviyesindeki teknik problem ve konuları belirlemek ve analiz edebilmek, tartışmalar yapabilmek, kanıta ve araştırmalara dayalı çözümler geliştirebilmek.
- Uzman ya da uzman olmayan dinleyici gruplarını, yapı teknolojileri ile ilgili konularda bilgilendirmek, onlara düşüncelerini problemleri ve çözüm yöntemlerini açık bir biçimde yazılı ve sözlü aktarabilmek.
- Teknik problemlerini tanımlama, formüle etme ve çözme becerisini kazanma.
- Yapı teknolojileri alanında, tasarım ve projelendirme çalışmalarını bağımlı veya bağımsız olarak gerçekleştirebilecek bilgi ve becerilere sahip olmak, yapılmış olan projeleri okumak, geliştirmek, uygulamak, denetlemek ve kontrolörlük yapabilmek.
- Yapı teknolojileri alanında yer alan deneysel çalışmaları ve arazi uygulamalarını bağımsız olarak gerçekleştirebilecek bilgi ve becerilere sahip olmak, yapılmış olan deneyleri ve arazi uygulamalarını denetlemek ve kontrol edebilmek.
- Yapı teknolojileri alanında yer alan duvar tekniklerini, yalıtım teknikleri, kalıp sistemleri ve demir donatı uygulama tekniklerini bağımsız olarak gerçekleştirebilecek bilgi ve becerilere sahip olmak, yapılmış olan uygulamaları denetlemek ve kontrol edebilmek.
- Yapı sisteminin uygulamasına yönelik olarak yer belirleme (ölçme), kazı ve dolgu işlemlerini bağımsız olarak gerçekleştirebilecek bilgi ve becerilere sahip olmak, yapılmış olan işlemleri denetleme ve kontrol edebilme.
- Teknik uygulamaları için gerekli olan teknikleri ve modern araçları kullanma becerisini kazanma.
- Bilgisayar paket programı kurabilir.
- Paket programa veri girişi yapabilir.
- Paket programı çalıştırabilir.
- Çıktıları yorumlayarak çizim yapıp, dosya haline getirilmesi işlemlerini yapabilir.
- Yapı sistemlerinin uygulamasına yönelik işlemleri bağımsız olarak gerçekleştirebilecek bilgi ve beceriler ile bakım ve onarımlarını yapabilmek için gerekli bilgi ve beceriye sahip olmak.
- İçme suyu temini ve iletimi, zemin yapı etkileşimi, zeminin deneysel olarak ele alınması, karayolu ulaştırması gibi konularda ara eleman ihtiyacını karşılamada beceri kazanma.
- Yapı teknolojileri alanındaki bilgi ve uygulamaları takip edip kullanabilecek ve meslektaşları ile iletişim kurabilecek düzeyde yabancı dil bilgisine sahip olmak.
- Disiplinler arası takımlarda çalışabilme becerisini kazanma.
- Mesleki ve etik sorumluluk bilincini kazanma.
- Etkin iletişim kurma becerisini kazanma.
- Mesleğini uygularken iş ve işçi sağlığı için gerekli güvenlik tedbirlerini alabilme.
- İnşaat Teknikerliği mesleğinin gerektirdiği davranış, bilgi ve becerilere sahip olmak,
- Yapı imalatı sürecinde kullanılabilecek güncel eğitim materyalleri ve teknolojileri geliştirme ve kullanma bilgi ve becerisine sahip olmak Milli mücadeleyi doğru tanımlayabilir.
- Milli egemenliğin gelişim sürecini ve önemini anlayabilir.
- Türk milletinin özelliklerini ve önceliklerini tanımlayabilir.
- Atatürk ilke ve inkılaplarını anlayıp yaşayabilir.
- Resmi veya diğer kurum veya şahıslarla mesleğinin gerektirdiği yazışmaları yapabilmek.
- Yönetmeliğine uygun ahşap veya metal iskele kurulumu yapabilir ve kurulmuş olan iskeleyi kontrol edebilir.Yönetmeliğine uygun kalıp işlerini kontrol edebilir, gerektiğinde kalıp işlerinde yardımcı olabilir.
- Ahşap, çelik ve betonarme yapı projesi çizebilir, çizilmiş olan eskizleri uygulama projesine dönüştürebilir.
- İzostatik yapı sistemlerinin denge ve hareket şartlarını inceleyebilir.
- Kesit tesir diyagramlarını çizebilir.
- Yapıların maloluş hesaplarını, metraj ve keşif işlerini yapabilir.
- Yapıların onarım ve güçlendirme işlemlerini planlamak ve yönetmek.
- Hasar görmüş yapıların hasar derecelendirmesini yapabilir.
- Çelik yapı projelerini okuyabilir, temel bulonlu ve kaynaklı çelik birleşim hesaplarını yapabilir.
- Türk Dili yazım kurallarını uygulayarak mesleği ile ilgili, rapor, tutanak, dilekçe gibi resmi evrakları tutabilmek.
Bu program ikinci öğretim olarak sunulmaktadır.
Atatürk Üniversitesi Erzurum Meslek Yüksekokulu Programlarına lise ve Meslek lisesi mezunu öğrenciler ÖSYM tarafından yapılan sınav sonucunda YGS-1 puan türünde yeterli puanı almış ve özel şartları taşıyan öğrenciler alınmaktadır.
İnşaat Teknolojisi programından mezun olan öğrenciler kazandıkları yeterlilik doğrultusunda ; İnşaat sektöründe mal/hizmet üreten, inşaat firmalarında , Mimari bürolarda, şantiyede uygulama yapan firmalarda, KPSS puanına göre veya sözleşmeli taşeron firma elemanı olarak TCK, DSİ, Ulaştırma bakanlığı gibi kamu kurum ve kuruluşlarında istihdam edilirler. Mezun öğrencilerimizden bazıları ise, lisans ve yüksek lisans seviyesinde eğitimlerine devam edebilmekte ve öğretim üyesi olarak çeşitli yükseköğrenim kurumlarında çalışmaktadırlar.
Yeterlilik sürekli geçerlidir.
Qualification Code | TR0030010837 | |
Qualification Title | Construction Technology (EP) | |
Awarding Body | Atatürk University | |
Awarding Body Contact | Atatürk University | |
Awarding Body Url | http://www.atauni.edu.tr/ | |
Orientation | General | |
EQF Level | 5 | The Qualification hasn't been included in TQF. |
TQF Level | 5 | |
Thematic Areas | Building and civil engineering | |
National Occupation Classification | - | |
Category | Main | |
Credit Value | - | |
Program Duration | - | |
Program Profile | - | |
Learning Environments | - | |
Description | - An ability to apply knowledge of mathematics, science, and technology.- An ability to design and conduct experiments, as well as to analyze data.- An ability to identify, formulate, and solve technical problems- An ability to design a system, component, or process to meet desired needs within realistic constraints- The broad education necessary to understand the impact of technical solutions in a global, Economic, environmental, and societal context- A recognition of the need for, and an ability to engage in life-long learningA knowledge of contemporary issues An ability to use the techniques, skills, and modern technology necessary for practice. An ability to function on multidisciplinary teams- An understanding of professional and ethical responsibility- An ability to communicate effectivelyHaving the knowledge and skills to perform the processes for the application of the building systems independently and the knowledge and skills necessary to perform maintenance and repairs,To have the knowledge and skills to perform design and project studies dependently or independently in the field of building technology, to read, develop, implement, supervise and supervise the projectsDrinking water supply and distribution,ground structure interaction, experimental ground handling, road transport etc, gaining skills in such subjectsRead steel building plans, calculate basic bolt and welded steel joint calculations. | |
Key Competencies | - | |
Further Info | A midterm and a final exam is given for each course carried out in the programs. The effect of Midterm exam (?) to success grade is 40 % and the effect exam of final exam is 60 % . Students must attend courses and fulfill attending requirements of the regulations in order to have final exams. All exams are evaluated over 100 points. Relative evaluation system is applied for evaluating students success grade . In this evaluation, the course instructor takes in to consideration the statistical result of grades that students attending courses take from midterm, year in and year end exams and these results are converted to letter as system with four under the terms defined in the instruction. . If students WGPA consisting of grades which students take is under 2 in successive two terms, they can’t take any courses in the next term. If a student takes AA, BA, BB, CB and CC from a course, he/she can be accepted as successful. DC and DD grades taken from a course are evaluated in terms of depending on students granduation of WGPA. If a student’s WGPA is over success grade , these courses are defined as successful, but in midterm and year in or enr, this letter grades are evaluated with their coefficients in the calculation of WGPA. FF grade is given to students whofail the course in question. Student who takes FF grade must meet conditions dealing with attending and exam by taking this course in the first semester or year. Success grade of courses, referred to as M and G isn’t included in the calculation of WGPA. | |
Quality Assurance | - | |
Access Requirements | Students who graduate Vocational high-school and other high-schools are admitted to Atatürk University Erzurum Vocational College. They are admitted according to the result of examination which is performed by ÖSYM and these students must get YGS 1-point sufficiently and they must have meet special requirements. Also , students are admitted to the programs through horizontal transfer. These transitions are regulated by an instruction students can make transition under the number and transition conditions which were pre-announced before and they can realize this procedure between diploma programs of different higher-education foundations or diploma programs within the same higher-education. | |
Conditions for Success | It is necessary that students can be successful from the courses defined in teaching program and can complete credit hours (a minimum of 100 lesson hours or 120 ECTS) successfully and get at least 2.00 WGPA and also they must be successful for their 30 day-training in order that they can graduate Atatürk University Erzurum Vocational College. | |
Progression Paths (Relationship Type) | Students graduating from the Construction Technology program are required to fulfill their qualifications. They are employed in public institutions such as TCK, DSİ, Ministry of Transportation as contracted subcontractor or according to KPSS score in companies that produce goods / services in construction sector, firms that are engaged in construction firms, architectural branches, and construction sites. | |
Legal Basis | - | |
Validity Period (If Any) | - | |
Url | Open Address |
TR0030010837
- An ability to apply knowledge of mathematics, science, and technology.- An ability to design and conduct experiments, as well as to analyze data.- An ability to identify, formulate, and solve technical problems- An ability to design a system, component, or process to meet desired needs within realistic constraints- The broad education necessary to understand the impact of technical solutions in a global, Economic, environmental, and societal context- A recognition of the need for, and an ability to engage in life-long learningA knowledge of contemporary issues An ability to use the techniques, skills, and modern technology necessary for practice. An ability to function on multidisciplinary teams- An understanding of professional and ethical responsibility- An ability to communicate effectivelyHaving the knowledge and skills to perform the processes for the application of the building systems independently and the knowledge and skills necessary to perform maintenance and repairs,To have the knowledge and skills to perform design and project studies dependently or independently in the field of building technology, to read, develop, implement, supervise and supervise the projectsDrinking water supply and distribution,ground structure interaction, experimental ground handling, road transport etc, gaining skills in such subjectsRead steel building plans, calculate basic bolt and welded steel joint calculations.
A midterm and a final exam is given for each course carried out in the programs. The effect of Midterm exam (?) to success grade is 40 % and the effect exam of final exam is 60 % . Students must attend courses and fulfill attending requirements of the regulations in order to have final exams. All exams are evaluated over 100 points. Relative evaluation system is applied for evaluating students success grade . In this evaluation, the course instructor takes in to consideration the statistical result of grades that students attending courses take from midterm, year in and year end exams and these results are converted to letter as system with four under the terms defined in the instruction. . If students WGPA consisting of grades which students take is under 2 in successive two terms, they can’t take any courses in the next term. If a student takes AA, BA, BB, CB and CC from a course, he/she can be accepted as successful. DC and DD grades taken from a course are evaluated in terms of depending on students granduation of WGPA. If a student’s WGPA is over success grade , these courses are defined as successful, but in midterm and year in or enr, this letter grades are evaluated with their coefficients in the calculation of WGPA. FF grade is given to students whofail the course in question. Student who takes FF grade must meet conditions dealing with attending and exam by taking this course in the first semester or year. Success grade of courses, referred to as M and G isn’t included in the calculation of WGPA.
Students who graduate Vocational high-school and other high-schools are admitted to Atatürk University Erzurum Vocational College. They are admitted according to the result of examination which is performed by ÖSYM and these students must get YGS 1-point sufficiently and they must have meet special requirements. Also , students are admitted to the programs through horizontal transfer. These transitions are regulated by an instruction students can make transition under the number and transition conditions which were pre-announced before and they can realize this procedure between diploma programs of different higher-education foundations or diploma programs within the same higher-education.
Students graduating from the Construction Technology program are required to fulfill their qualifications. They are employed in public institutions such as TCK, DSİ, Ministry of Transportation as contracted subcontractor or according to KPSS score in companies that produce goods / services in construction sector, firms that are engaged in construction firms, architectural branches, and construction sites.