Makine Bakımcı Seviye 5 MYK Mesleki Yeterlilik Belgesi

ISCO 08: 7233

ISCO 08: 7233

This qualification is for the Machine Maintenance (Level 5) profession to be carried out by people (personnel) who have been trained and qualified and to increase the quality in related professional studies;

• To define the qualifications, knowledge, skills and competencies that candidates should have,

• To enable candidates to prove their professional competence with a valid and reliable document,

• It has been prepared to create references and resources for the education system, examination and certification bodies.

The learning outcomes of this qualification can be acquired in formal and non-formal learning environments such as educational institutions, as well as independently in on-the-job and free learning environments.

Person with this qualification;

• Explains occupational health and safety measures.
• Defines the legal and workplace rules on occupational health and safety.
• It describes reducing the risk factors related to occupational health and safety.
• Describes applying emergency procedures in case of danger.
• Explains environmental protection measures.
• Describes the reduction of environmental risks.
• Lists the processes of acting economically in the consumption of business resources.
• Explains the quality requirements for business processes and working environment.
• Explains the techniques in providing quality.
• It describes the work to eliminate the errors and malfunctions detected during the operation.
• Makes the installation of machines.
• Removes the machine's fasteners and installations.
• It ensures safe lifting and transport of the machine.
• Explains the ground and installation preparations where the machine will be installed.
• It ensures that the machine is placed in the determined location in accordance with the occupational safety rules and workplace instructions.
• Performs the connection and assembly operations of the machine in accordance with the procedures.
• Makes the necessary technical settings for the machine to work as desired.
• Fills out the forms giving information about the machines that have been installed.
• It runs the installed machine or makes its final checks by making it run.
• Processes the installation processes to the relevant forms.
• OHS implements environmental and quality requirements.
• Applies the OHS rules in the works it performs.
• It applies environmental protection measures in its works.
• Applies quality requirements in the works it performs.
• It reports by making checks related to maintenance activities.
• Makes evaluations about pre-maintenance controls.
• Prepares business plan for maintenance activities.
• It ensures that the work is carried out in line with the work plan.
• It prepares the necessary machinery, equipment and materials to work before preventive maintenance.
• Examines the basic working principles of machines.
• Explains the basic features of spare parts and consumables of machines.
• Prepares the necessary materials and equipment for the study.
• Takes the safety precautions of the machine to be maintained in accordance with the instructions.
• It closes or takes control of all plumbing connections that may be related to the machine or work area to be maintained.
• The estimator prepares the necessary machinery, equipment and materials for operation before maintenance.
• It checks the suitability of the work area in terms of OHS.
• It makes the necessary apparatus, machinery and equipment ready for operation.
• Prepares control and measuring instruments according to the determined process.
• Gets information from the operator about the machine/production line to be maintained.
• Performs preventive maintenance activities.
• It lubricates the parts of the machines that need to be lubricated in accordance with the user manuals or maintenance instructions.
• It performs the tightening operation by checking the possible loose parts and connections.
• It cleans the machine from foreign substances such as oil, dust, rust, metal parts.
• It performs the oil change of the machines periodically.
• Replaces filter, seal, belt and bearing.
• It enables the changing parts to work as desired by adjusting the settings.
• Performs predictive maintenance activities.
• Makes oil measurements and analyzes of the machine / production line.
• Makes temperature measurements and analyzes of the machine / production line.
• It makes sound (noise) measurements and analyzes of the machine / production line.
• Makes vibration measurements and analyzes of the machine / production line.
• Reports the measurement and analysis results according to standard values.
• Explains predictive after-maintenance operations.
• Evaluates reports about the machine/production line maintained.
• Explains the work of preparing the maintenance plan of the machine / production line according to the evaluation results.
• Explains fault detection.
• Lists fault detection methods.
• Lists possible sealing element failures.
• List possible mechanical part failures.
• Fixes faults.
• Eliminates the faults of sealing elements.
• It fixes the malfunctions of mechanical parts.
• Performs final operations on machines whose maintenance/repair has been completed.
• Operates the machine that is maintained or makes its final checks by making it run.
• It processes the maintenance operations on the machine maintenance control cards.

This qualification aims to document professional learning outcomes and does not contain key competences.

• Candidates who want to achieve this qualification are subjected to theoretical and performance-based exams defined in the units.
• Theoretical and performance-based exams in the qualification units can be done separately for each unit or together. However, each unit is evaluated independently.
• At least twenty (20) questions for A1, B2 and B3 units in the theoretical exam; At least ten (10) questions for unit A2; For the B1 unit, a 4-option multiple choice written exam with at least twenty-five (25) questions must be applied. In the exam, candidates are given an average of 1.5 minutes for each question. In addition, in the B2 unit, candidates are given at least 4 scenarios in total, including 2 fault scenarios with structured questions and answers, a scenario for the inconveniences of the work area and equipment, and a scenario for the controls of maintenance activities. Each question is evaluated according to a structured answer and rubric. In the exam, candidates are given time for each question in accordance with the scope and content of the information criterion it is related to, and this time is specified in the structured format.

Quality assurance processes are provided through certification bodies authorized in line with the relevant legislation, under the responsibility of the Vocational Qualifications Authority.

Establishment and Approval of National Qualifications:

National qualifications developed by institutions and organizations that have the power to represent their sector and profession are verified by the Sector Committees and approved by the VQA Board of Directors.

Assesment and evaluation:

It is carried out by certification bodies accredited by TÜRKAK according to ISO/EN 17024 standard and authorized by the Vocational Qualifications Authority, in accordance with VQA legislation and conditions and methods defined in national qualifications. All measurement-evaluation processes are recorded and stored on camera.

Certification:

VQA Vocational Qualification Certificate is issued to individuals who are determined to be successful by the Authorized Certification Bodies.

Self assessment:

Authorized Certification Bodies carry out self-assessment activities every year in accordance with the procedures and principles determined by VQA. Activity results are submitted to VQA with a self-evaluation report.

External Evaluation:

Based on self-evaluation reports, scheduled or unscheduled surveillance audits are carried out at least once a year by the VQA Audit Department. External evaluation reports are submitted to Authorized Certification Bodies and VQA Board of Directors. In addition, surveillance audits are carried out by TÜRKAK at least every two years within the scope of ISO/EN 17024.

Regular Review:

The external evaluation activities and results of VQA Audit Department are regularly reviewed by VQA Executive Board. In addition, TÜRKAK's external evaluation activities and results are subject to regular review by the European Accreditation Union.

Information Management Systems:

Authorization, measurement-evaluation, self-evaluation and external evaluation processes are carried out through VQA Portal.

Feedback Mechanisms:

In all processes related to qualification, stakeholder participation is ensured at the highest level and opinions, suggestions, objections and complaints are evaluated in accordance with the legislation.

Entry condition is not required.

Persons with this qualification have the opportunity to apply for the measurement-evaluation processes for the professional qualification certificates at advanced levels or in different fields offered in the same field, and they can also participate in employment in the field of machine maintenance.

Vocational Qualifications Authority Law

Regulation on Preparation of National Occupational Standards and National Qualifications

Vocational Qualifications Authority Examination, Measurement, Evaluation and Certification Regulation

Audit Procedures and Principles for Vocational Qualifications Authority Certification Bodies

Qualification certificate is valid for 5 years from the date of issue.