Mekatronik Mühendisliği Lisans Diploması

ISCO 08

ISCO 08

Graduates of the Department of Mechatronics Engineering at Bahçeşehir University:

• Serve as engineers in mechatronics-related fields across diverse sectors at the national and international levels, and advance in their careers.
• Lead project teams and/or assume managerial roles on mechatronics-related projects within their organizations.
• Continuously update their professional knowledge through post-graduate and continuing education.
• Conduct R&D and engage in the development and management of innovative technologies to enhance the welfare of the country and of humanity.

Education and training may take the form of formal, open or distance education. In addition, practical training is provided in laboratories and workshops within higher education institutions or in industry, health institutions and workplaces as internships or on-the-job training.

1. Build up a body of knowledge in mathematics and science.   

2. Build up a body of knowledge in Mechatronics Engineering subjects.

3. Ability to use theoretical and applied information in mathematics, science and Mechatronics Engineering subjects to model and solve complex engineering problems.     

4. Identify, formulate, and solve complex Mechatronics Engineering problems.

5. Ability to select and apply proper modeling and analysis methods for complex Mechatronics Engineering problems. 

6. Design complex Mechatronic systems, processes, devices or products under realistic constraints and conditions, in such a way as to meet the desired result; apply modern design methods for this purpose.  

7. Devise, select, and use modern techniques and tools needed for solving complex problems in Mechatronics Engineering practice.     

8. Ability to employ information technologies effectively.        

9. Design numerical or pysical experiments for investigating the complex problems specific to Mechatronics Engineering.      

10. Conduct numerical or pysical experiments, collect data, analyze and interpret results for investigating the complex problems specific to Mechatronics Engineering.      

11. Cooperate efficiently in intra-disciplinary teams.    

12. Cooperate efficiently in multi-disciplinary teams.   

13. Ability to show self-reliance when working on Mechatronics-related problems.       

14. Ability to communicate effectively both orally and in writing.        

15. Ability to communicate effectively in English and Turkish (if he/she is a Turkish citizen).   

16. Ability to write and understand reports, prepare design and production reports.       

17. Ability to deliver effective presentations, give and receive clear and understandable instructions.     

18. Recognize the need for life-long learning.  

19. Show ability to access information, to follow developments in science and technology, and to continuously educate oneself.      

20. Develop an awareness of professional and ethical responsibility, and behave accordingly.    

21. Be informed about the standards used in Mechatronics Engineering applications.    

22. Learn about business life practices such as project management, risk management, and change management.

23. Develop an awareness of entrepreneurship and innovation. 

24. Develop an awareness of ustainable development.  

25. Acquire knowledge about the effects of practices of Mechatronics Engineering on health, environment, security in universal and social scope.  

26. Develop an awareness of the legal consequences of Mechatronics engineering solutions.

Our graduates possess the following key competencies at an advanced level:

• Literacy competence
• Multilingual competence
• Mathematical competence and competence in science, technology, and engineering
• Digital competence
• Personal, social, and learning-to-learn competence
• Citizenship competence
• Entrepreneurship competence
• Cultural awareness and expression competence

• Within the scope of Article 22 of the Bahçeşehir University Associate and Undergraduate Education and Examination Regulation:

  “Except for courses based entirely on projects or practice, each course must include at least one mid-term/within-semester assessment and one end-of-semester/year assessment activity among its evaluation activities. These activities may be exams or, depending on the nature of the course and the desired learning outcomes, projects, case studies, in-class applications, laboratory work, homework, and similar activities.

  When calculating the student’s final grade, the weights of the activities to be used are determined by the instructor at the beginning of the semester, with the contribution of the end-of-semester activity being at least forty percent (40%). These weights are announced through the course syllabus included in the student information system.

  Midterm and final exams may be written, multiple-choice, or combined written and multiple-choice. Written exams (for courses delivered remotely, hybrid, or face-to-face) may be conducted electronically. However, exams of practical or special-structure courses may be oral or assessed through the student’s semester work. The exam method for such courses is determined upon the recommendation of the department/program chair and the decision of the relevant academic board, and must be reported to the Rectorate no later than seven weeks after the semester start date.

  The results of exams and all other assessment activities conducted during the semester must be announced to students within a maximum of ten days after they are held. Instructors are obliged to inform students of their in-term grades and attendance results no later than the last week of the teaching period. The student’s final grade for a course is determined based on all semester activities, as announced in the course teaching plan, using the relative evaluation method.”

• Grades and course exemptions ARTICLE 26 – (1) Course success grades are determined by the letters shown in the table below and the corresponding coefficients between 0.00 and 4.00. (Amended table: RG-1/3/2020-31055) Course Success Grade A A- B+ B B- C+ C C- D+ D F NA Coefficient Equivalent 4.00 3.67 3.33 3.00 2.67 2.33 2.00 1.67 1.33 1.00 0.00 0.00 (2) The following letters are used on the student transcript: a) (I) Incomplete: b) (S) Sufficient: c) (U) Insufficient: ç) (PR) Developing: (EX) Exempt: e) (NA) Absent. Students who are absent from a course cannot take the semester/end-of-year exam for that course and cannot benefit from other exam rights granted. The NA grade is treated as a zero coefficient in grade point average calculations. f) (W) Course Withdrawn: This is the grade given for the course from which the withdrawal was made; it has no effect on the grade point average. g) (NI) Course Not Included in the Grade Point Average: This is given for courses taken voluntarily by the student, provided that they are not included in the grade point average. These courses are taken within the scope of the course load defined in Article 18 (Amended phrase: RG-28/3/2021-31437). Courses taken with NI status cannot be repeated and cannot be counted in place of another course.

To oversee the quality of higher education programs;

YÖK is responsible for the planning, organization, management and supervision of education and training and other activities carried out in higher education institutions.

"University Monitoring and Evaluation Reports" of higher education institutions prepared annually within the framework of the criteria determined by YÖK are published. The reports prepared according to these reports, including quantitative and qualitative evaluations of higher education institutions, are shared with the public by YÖK.

Every year, YÖK publishes the "Foundation Higher Education Institutions Report", which includes academic, administrative and financial data on foundation higher education institutions. These reports, which include quantitative and qualitative evaluations of foundation higher education institutions, are shared with the public by YÖK. Quality assurance of undergraduate programs in higher education is ensured according to the "Procedures and Principles for Ensuring Quality Assurance of Higher Education Diploma Programs":

1. Creation and Approval of Curricula:

1.1. YÖK determines the minimum standards and criteria required for the opening of undergraduate departments and programs in higher education institutions.

1.2. The curriculum of undergraduate programs in higher education institutions and the learning outcomes that each program will provide to students are determined by the senates of higher education institutions in accordance with the basic principles determined by YÖK on these issues.

1.3. After the curriculum of the National Core Curriculum is accepted by the relevant Council of Deans, it is implemented by higher education institutions with the approval of YÖK.

2. Assessment and Evaluation: The measurement and evaluation of the learning outcomes of each undergraduate program is carried out according to the education and training and examination regulations prepared by higher education institutions in accordance with the basic principles determined by YÖK.

3. Certification: Students enrolled in undergraduate programs, if they successfully complete the course credits and other obligations determined by higher education institutions; receive an undergraduate diploma.

4. Self-Assessment-External Evaluation: Higher education institutions, in the context of continuous monitoring, enter the "Institutional Internal Evaluation Reports" of the previous year into the Information System prepared by the Higher Education Quality Council (YÖKAK) at the beginning of each year. YÖKAK shares the "Institutional Feedback Report" prepared for the external evaluation of higher education institutions with the public. In addition, accreditation decisions issued by accreditation bodies authorized or recognized by YÖKAK also indicate that the quality assurance of the qualifications of the programs is ensured. YÖKAK conducts regular review activities regarding the qualifications determined in accordance with the legislation.

Departments also carry out all the necessary work in accordance with the BOLOGNA criteria, EUR-ACE and MÜDEK (Association for Evaluation and Accreditation of Engineering Programs) accreditation rules. In addition, each student and each course is individually monitored in accordance with the program qualifications and it is proved that each student has gained all the qualifications required by the program.

Accreditation Start/End Date: 01.05.2025–30.09.2027

• Graduation from secondary education institutions or foreign secondary education institutions recognized as equivalent by the Ministry of National Education, and meeting the admission requirements of higher education institutions’ undergraduate programs.
• Placement in the relevant undergraduate program of a higher education institution as a result of the central examination conducted by the Student Selection and Placement Center (ÖSYM), in accordance with the procedures and principles determined by YÖK.
• Placement of associate degree graduates into undergraduate programs that are a continuation of their field of study in higher education institutions, as a result of the Vertical Transfer Examination (DGS) conducted by ÖSYM, in accordance with the procedures and principles determined by YÖK.

Defense industry, automation, machine design, manufacturing, automotive, autonomous systems, robotics, and test systems are amoung the application areas of mechatronics engineering. Bahcesehir University Mechatronics Engineering graduates, who have the opportunity of taking applied courses, can work in these sectors as R&D or project engineers, pursue a master's degree, or establish their own companies as entrepreneurs

Higher Education Law No. 2547

1.1. Regulation on the Principles of Transferring Between Associate and Undergraduate Programs, Double Major, Minor and Inter-Institutional Credit Transfer in Higher Education Institutions

1.2. Regulation on the Continuation of Graduates of Vocational Schools and Open Education Associate Degree Programs to Undergraduate Education

2. Law No. 2547 on Higher Education (Additional Article-35)

2.1.Regulation on Higher Education Quality Assurance and Higher Education Quality Board

The qualification is valid at all times.