| Yeterlilik Kodu | TR0030003222 | |
| Yeterlilik Adı | Mühendislik ve Teknoloji Yönetimi Tezsiz Yüksek Lisans Diploması | |
| Sorumlu Kurum | Doğuş Üniversitesi | |
| Sorumlu Kurum İletişim Bilgisi | Esenkent, Dudullu Osb Mah, Nato Yolu Cd 265/ 1, 34775 Ümraniye/İstanbul | |
| Sorumlu Kurum URL | https://www.dogus.edu.tr/ | |
| Yönelim | Akademik | |
| AYÇ Seviyesi | 7 | Yeterlilik TYÇ’ye yerleştirilmemiştir. |
| TYÇ Seviyesi | 7 | |
| Sınıflandırma (Tematik Alan) | Yönetim ve idare | |
| Sınıflandırma (Meslek Kodu) |
ISCO:08 | |
| Kategori | Ana | |
| Kredi Değeri | 90 | |
| Programın Normal Süresi | 1 | |
| Program Profili (Amaç) | - | |
| Öğrenme Ortamları | - | |
| Öğrenme Kazanımları (Tanım) |
| |
| Anahtar Yetkinlikler | - | |
| Ölçme ve Değerlendirme Yöntemleri | - | |
| Kalite Güvencesi | - | |
| Giriş Şartı | - | |
| Başarma Şartları | Bu yüksek lisans programını tamamlamak için en az 10 ders (75 AKTS kredisi) ve Yüksek Lisans Tezi (15 AKTS kredisi) dersini almak zorunludur. Bunların yanında öğrencinin aldığı tüm derslerden en az C veya üzeri harf notu alması ve genel not ortalamasının 4.00 üzerinden en az 2,5 olması gerekmektedir. | |
| İlerleme Yolları (İlişki Türü) | Mezunlar; üretim, sağlık, bankacılık, ulaştırma, lojistik, inşaat, elektronik, eğitim, gıda, pazarlama, sigortacılık gibi pek çok sektörde, gerek özel gerekse kamu kuruluşlarında çalışabilirler. | |
| Yasal Dayanağı | - | |
| Geçerlilik Süresi (Varsa) | Yeterlilik sürekli geçerlidir. | |
| Yeterliliğe Erişim için İnternet Adresi | Adresi Aç | |
TR0030003222
ISCO:08
ISCO:08
- Matematik, fen bilimleri, yönetim bilimleri ve temel mühendislik bilimi ile ilgili konularında yeterli bilgi birikimi; bu alanlardaki kuramsal ve uygulamalı bilgileri mühendislik ve teknoloji uygulamalarını modelleme ve yönetme için uygulayabilme becerisi.
- Karmaşık teknoloji uygulamalarını, tanımlama, formüle etme ve çözme becerisi; bu amaçla uygun analiz ve modelleme yöntemlerini seçme ve uygulama becerisi.
- Karmaşık bir teknolojik sistemi, süreci, cihazı veya ürünü gerçekçi kısıtlar ve koşullar altında, belirli gereksinimleri karşılayacak şekilde tasarlama becerisi; bu amaçla modern tasarım yöntemlerini uygulama becerisi. (Gerçekçi kısıtlar ve koşullar tasarımın niteliğine göre, ekonomi, çevre sorunları, sürdürülebilirlik, üretilebilirlik, etik, sağlık, güvenlik, sosyal ve politik sorunlar gibi öğeleri içerirler.)
- Mühendislik ve Teknoloji Yönetimi uygulamaları için gerekli olan modern teknik ve araçları seçme ve kullanma becerisi; bilişim teknolojilerini etkin bir şekilde kullanma becerisi.
- Mühendislik ve Teknoloji Yönetimi süreçlerinin incelenmesi için deney tasarlama, deney yapma, veri toplama, sonuçları analiz etme ve yorumlama becerisi.
- Disiplin içi ve çok disiplinli takımlarda etkin biçimde çalışabilme becerisi; bireysel çalışma becerisi.
- Türkçe ve İngilizce sözlü ve yazılı, ve görsel yöntemler kullanarak etkin iletişim kurma becerisine sahip olmak.
- Yaşam boyu öğrenmenin gerekliliği bilinci; bilgiye erişebilme, bilim ve teknolojideki gelişmeleri izleme ve kendini sürekli yenileme becerisi.
- Mesleki ve etik sorumluluk bilinci.
- Proje yönetimi ile risk yönetimi ve değişim yönetimi gibi iş hayatındaki uygulamalar hakkında bilgi.
- Girişimcilik, yenilikçilik ve sürdürebilir kalkınma hakkında farkındalık.
- Mühendislik ve Teknoloji Yönetimi uygulamalarının evrensel ve toplumsal boyutlarda sağlık, çevre ve güvenlik üzerindeki etkileri ile çağın sorunları hakkında bilgi; mühendislik çözümlerinin hukuksal sonuçları konusunda farkındalık.
Mezunlar; üretim, sağlık, bankacılık, ulaştırma, lojistik, inşaat, elektronik, eğitim, gıda, pazarlama, sigortacılık gibi pek çok sektörde, gerek özel gerekse kamu kuruluşlarında çalışabilirler.
Yeterlilik sürekli geçerlidir.
| Qualification Code | TR0030003222 | |
| Qualification Title | Graduate Diploma in Engineering and Technology Management without Thesis (TR)
| |
| Awarding Body | Dogus University | |
| Awarding Body Contact | Esenkent, Dudullu Osb Mah, Nato Yolu Cd 265/ 1, 34775 Ümraniye/İstanbul | |
| Awarding Body Url | https://www.dogus.edu.tr/ | |
| Orientation | Academic | |
| EQF Level | 7 | The Qualification hasn't been included in TQF. |
| TQF Level | 7 | |
| Thematic Areas | Management and administration | |
| National Occupation Classification |
ISCO:08 | |
| Category | Main | |
| Credit Value | 90 | |
| Program Duration | 1 | |
| Program Profile | - | |
| Learning Environments | - | |
| Description |
| |
| Key Competencies | - | |
| Further Info | Each course is assessed by any combination of class participation, written assignments, project or examinations. Assessment method may vary according to individual Unit requirements(1) During a semester there is at least one mid-term and one final examination for each course. The homework’s, projects and similar works can be recognized as midterm upon the decision of the instructor. A written final exam is assigned at the end of the semester. In the assessment of student’s success mid-term and final exam grades as well as other works done are taken into consideration. (2), The weight of midterm (or other relevant Works) cannot be less than 40% and the weight of final exam cannot be more than 60% in the calculation of final grade. Those weights are announced at the beginning of the semester by instructors.It requires a minimum grade point average of 3.00/4.00 for graduation from the Engineering and Technology Management Masters Degree program. The grades and corresponding points are given below:GRADE points A 4,0 A- 3,7 B+ 3,3 B 3,0 B- 2,7 C+ 2,3 C 2,0 F 0*You can consult relevant course’s handbook for further information.In the Engineering and Technology Management Masters Degree program with thesis, the students are required to take a minimum of 10 courses (75 ECTS credits) and prepare a graduate project under the consultancy of an advisor (15 ECTS credits). Totally 90 ECTS credits should be accomplished for graduation. In addition, the students are expected to have minimum C grade from all courses and for graduation, a student must have a GPA at least 2.50/4.00. | |
| Quality Assurance | - | |
| Access Requirements | The candidate,1. Should have bachelors degree (Students graduated different from the Bachelors degree of Engineering can take courses from Preparatory Program upon the Departments approval.)2. Has to have a GPA of at least 2.00/4.00 in his/her latest undergraduate program.3. Has to be successful in the interview organized by the admission committee. 4. Decision for acceptance to the program is based on the weighted average consisting of 40 % of undergraduate GPA and 60 % of interview score. | |
| Conditions for Success | In the Engineering and Technology Management Masters Degree program with thesis, the students are required to take a minimum of 10 courses (75 ECTS credits) and prepare a graduate project under the consultancy of an advisor (15 ECTS credits). Totally 90 ECTS credits should be accomplished for graduation. In addition, the students are expected to have minimum C grade from all courses and for graduation, a student must have a GPA at least 2.50/4.00.In the Engineering and Technology Management Masters Degree program with thesis, the students are required to take a minimum of 10 courses (75 ECTS credits) and prepare a graduate project under the consultancy of an advisor (15 ECTS credits). Totally 90 ECTS credits should be accomplished for graduation. In addition, the students are expected to have minimum C grade from all courses and for graduation, a student must have a GPA at least 2.50/4.00. | |
| Progression Paths (Relationship Type) | The graduates of this program can work in various of sectors such as manufacturing, health, banking, logistics, construction, electronics, food processing, marketing, higher education, etc. and can pursue a wide variety of jobs, including:R&DFinanceManufacturing systemsQuality ControlSales/MarketingInformation systemsHuman ResourcesProduction/services planningMaintenance planningConsultingLogisticsPurchasing/Material requirements planning | |
| Legal Basis | - | |
| Validity Period (If Any) | Qualification is continuous | |
| Url | Open Address | |
TR0030003222
ISCO:08
ISCO:08
- Sufficient knowledge on mathematics, science, management science and engineering science. The ability to apply the theoretical and practical knowledge acquired in the above mentioned areas for modeling and solving engineering problems.
- The ability to define, formulate and solve complex technological problems.
- The ability to choose and apply the appropriate methodology in solving those problems.
- Under practical conditions and constraints, the ability to design any kind of complex technological system, process, device or product which meets the requirements and ability to apply modern design methods for this purpose.
- Ability to develop, select, and use modern methods and tools that are required for Engineering and Technology management and ability to use information Technologies effectively.
- Ability to design and conduct experiments as well as collect data, analyze, and interpret results for examining Engineering and Technology management.
- Ability to function on interdisciplinary and multidisciplinary teams; ability to function on individually.Ability to communicate effectively with written, oral, and visual forms both in Turkish and English.Recognition of the need for lifelong learning; ability to access knowledge, to pursue the developments in science and technology, and to remain up to date.
- Consciousness of professional social and ethical responsibilityKnowledge about professional applications such as project, risk, and change management.
- Awareness of innovativeness, entrepreneurship, and sustainable development.
- A diverse background providing the ability to discuss and evaluate the impact of engineering and technology management solutions on health, environment, and safety in global and societal context.
- Up to date with contemporary issues.
Each course is assessed by any combination of class participation, written assignments, project or examinations. Assessment method may vary according to individual Unit requirements(1) During a semester there is at least one mid-term and one final examination for each course. The homework’s, projects and similar works can be recognized as midterm upon the decision of the instructor. A written final exam is assigned at the end of the semester. In the assessment of student’s success mid-term and final exam grades as well as other works done are taken into consideration.
(2), The weight of midterm (or other relevant Works) cannot be less than 40% and the weight of final exam cannot be more than 60% in the calculation of final grade. Those weights are announced at the beginning of the semester by instructors.It requires a minimum grade point average of 3.00/4.00 for graduation from the Engineering and Technology Management Masters Degree program. The grades and corresponding points are given below:GRADE points A 4,0 A- 3,7 B+ 3,3 B 3,0 B- 2,7 C+ 2,3 C 2,0 F 0*You can consult relevant course’s handbook for further information.In the Engineering and Technology Management Masters Degree program with thesis, the students are required to take a minimum of 10 courses (75 ECTS credits) and prepare a graduate project under the consultancy of an advisor (15 ECTS credits). Totally 90 ECTS credits should be accomplished for graduation. In addition, the students are expected to have minimum C grade from all courses and for graduation, a student must have a GPA at least 2.50/4.00.
The candidate,1. Should have bachelors degree (Students graduated different from the Bachelors degree of Engineering can take courses from Preparatory Program upon the Departments approval.)2. Has to have a GPA of at least 2.00/4.00 in his/her latest undergraduate program.3. Has to be successful in the interview organized by the admission committee. 4. Decision for acceptance to the program is based on the weighted average consisting of 40 % of undergraduate GPA and 60 % of interview score.
The graduates of this program can work in various of sectors such as manufacturing, health, banking, logistics, construction, electronics, food processing, marketing, higher education, etc. and can pursue a wide variety of jobs, including:R&DFinanceManufacturing systemsQuality ControlSales/MarketingInformation systemsHuman ResourcesProduction/services planningMaintenance planningConsultingLogisticsPurchasing/Material requirements planning
Qualification is continuous