Yeterlilik Kodu

TR0030015255

Yeterlilik Adı
Tekstil Mühendisliği Doktora Diploması
Sorumlu KurumEge Üniversitesi
Sorumlu Kurum İletişim BilgisiEge Üniversitesi Rektörlüğü Gençlik Caddesi No : 12 35040 Bornova - İZMİR
Sorumlu Kurum URLhttp://ege.edu.tr/
YönelimAkademik
AYÇ Seviyesi8
Yeterlilik TYÇ’ye yerleştirilmemiştir.
TYÇ Seviyesi 8
Sınıflandırma (Tematik Alan)Tekstil (kıyafetler, ayakkabı ve deri)
Sınıflandırma (Meslek Kodu) -
KategoriAna
Kredi Değeri240
Programın Normal Süresi 4
Program Profili (Amaç)-
Öğrenme Ortamları-
Öğrenme Kazanımları (Tanım)
  • Tekstil Mühendisliği ve/veya ilgili disiplinlerdeki ortak bir araştırma sürecini kurgulama, tasarlama, uygulama ve uyarlamada liderlik özelliği ve karar verebilme yeteneği.
  • Gerek Tekstil Mühendisliği gerekse de disiplinler arası çalışmaların SCI kapsamındaki dergilerde yayınlayabilme ve uluslar arası sempozyumlarda sunabilme yeteneği.
  • Uzmanlık alanı ile ilgili bilgilerini akademik ve/veya endüstriyel anlamda paylaşabilme ve gelişmeye katkıda bulunabilme yeteneği.
  • Uzmanlık alanı ile ilgili yenilikleri ve gelişmeleri izleme gereksinimi ile kendini sürekli yenileme konusunda farkındalık.
  • Tekstil Mühendisliği konusunda yenilik niteliğinde bir düşünce, yöntem, tasarım ve/veya uygulama geliştirebilme veya mevcut bir düşünce, yöntem, tasarım ve/veya uygulamayı farklı bir alana uygulayabilme becerisi.
  • Özgün bir konuyu araştırabilme, kavrayabilme, tasarlayabilme, uyarlayabilme ve uygulayabilme yeterliliği.
Anahtar Yetkinlikler -
Ölçme ve Değerlendirme Yöntemleri

Öğrencinin bir yüksek lisans dersinin yarıyıl sonu sınavına girebilmesi için, o ders için ön görülen devam zorunluluğunu yerine getirmiş olması gerekmektedir. Yüksek lisans dersinin başarı notu ara sınav notunun %60’ının toplamıdır. Öğrencinin ilgili dersten başarılı sayılabilmesi için bu notun en 70 olması gerekmektedir. Lisansüstü derslerinin sınav notları 100 tam not üzerinden belirlenir. Ancak istendiği taktirde bir öğrencinin öğrenim durum belgesinin harfli not sistemine veya tam puan 4 esasına göre de eşdeğerliliği verilebilmektedir.

Kalite Güvencesi-
Giriş Şartı-
Başarma Şartları-
İlerleme Yolları (İlişki Türü)-
Yasal Dayanağı-
Geçerlilik Süresi (Varsa)

Belge sürekli geçerlidir.

Yeterliliğe Erişim için İnternet Adresi Adresi Aç
Yeterlilik Kodu

TR0030015255


Yeterlilik Adı
Tekstil Mühendisliği Doktora Diploması

Sorumlu Kurum
Ege Üniversitesi

Sorumlu Kurum İletişim Bilgisi
Ege Üniversitesi Rektörlüğü Gençlik Caddesi No : 12 35040 Bornova - İZMİR

Sorumlu Kurum URL

Yönelim
Akademik

Sınıflandırma (Meslek Kodu)
-

AYÇ Seviyesi
8

TYÇ Seviyesi
8
Yeterlilik TYÇ’ye yerleştirilmemiştir.

Sınıflandırma (Meslek Kodu)
-

Kategori
Ana

Kredi Değeri
240

Programın Normal Süresi
4

Program Profili (Amaç)
-

Öğrenme Ortamları
-

Öğrenme Kazanımları (Tanım)
  • Tekstil Mühendisliği ve/veya ilgili disiplinlerdeki ortak bir araştırma sürecini kurgulama, tasarlama, uygulama ve uyarlamada liderlik özelliği ve karar verebilme yeteneği.
  • Gerek Tekstil Mühendisliği gerekse de disiplinler arası çalışmaların SCI kapsamındaki dergilerde yayınlayabilme ve uluslar arası sempozyumlarda sunabilme yeteneği.
  • Uzmanlık alanı ile ilgili bilgilerini akademik ve/veya endüstriyel anlamda paylaşabilme ve gelişmeye katkıda bulunabilme yeteneği.
  • Uzmanlık alanı ile ilgili yenilikleri ve gelişmeleri izleme gereksinimi ile kendini sürekli yenileme konusunda farkındalık.
  • Tekstil Mühendisliği konusunda yenilik niteliğinde bir düşünce, yöntem, tasarım ve/veya uygulama geliştirebilme veya mevcut bir düşünce, yöntem, tasarım ve/veya uygulamayı farklı bir alana uygulayabilme becerisi.
  • Özgün bir konuyu araştırabilme, kavrayabilme, tasarlayabilme, uyarlayabilme ve uygulayabilme yeterliliği.

Anahtar Yetkinlikler
-

Ölçme ve Değerlendirme Yöntemleri

Öğrencinin bir yüksek lisans dersinin yarıyıl sonu sınavına girebilmesi için, o ders için ön görülen devam zorunluluğunu yerine getirmiş olması gerekmektedir. Yüksek lisans dersinin başarı notu ara sınav notunun %60’ının toplamıdır. Öğrencinin ilgili dersten başarılı sayılabilmesi için bu notun en 70 olması gerekmektedir. Lisansüstü derslerinin sınav notları 100 tam not üzerinden belirlenir. Ancak istendiği taktirde bir öğrencinin öğrenim durum belgesinin harfli not sistemine veya tam puan 4 esasına göre de eşdeğerliliği verilebilmektedir.


Kalite Güvencesi
-

Giriş Şartı
-

Başarma Şartları
-

İlerleme Yolları (İlişki Türü)
-

Yasal Dayanağı
-

Geçerlilik Süresi (Varsa)

Belge sürekli geçerlidir.


Yeterliliğe Erişim için İnternet Adresi
Adresi Aç

Qualification Code

TR0030015255

Qualification Title
Textile Engineering Doctoral Degree
Awarding BodyEGE UNIVERSITY
Awarding Body ContactEge University Rectorate Gençlik Caddesi 35040 Bornova – Izmir Telephone: (0-232) 311 10 10 Email: webadmin@ege.edu.tr
Awarding Body Urlhttp://ege.edu.tr/
OrientationAcademic
EQF Level8
The Qualification hasn't been included in TQF.
TQF Level 8
Thematic AreasTextiles (clothes, footwear and leather)
National Occupation Classification -
CategoryMain
Credit Value-
Program Duration-
Program Profile-
Learning Environments-
Description
  • Having the skill of leadership for building, designing,applying and costumizing a research process in textile engineering and/or relevant disciplines and the skill for decision making.
  • The skill for publishing both textile engineering and interdisciplinary studies in magazines as part of SCI and the skill of presenting them in international symposiums.
  • The skill for sharing academic and/or industrial information relevant to area of expertise and making contribution to improvement.
  • Awareness on the necessity for following the innovations and developments in the area of expertise.
  • The skill of improving an innovative idea, method, design and/or application about textile engineering or the skill for performing the current idea, method, design and/or application into a different field.
  • The skill for researching, comprehending, designing, costumizing and performing an original subject.
Key Competencies-
Further Info

In order to enter the final exam of a second cycle lesson, students must fulfill the courses compulsory attendance. The final grade of the course is calculated by adding 40% of the score of the midterm examination, and 60% of the score of the final examination. When the final score equals to, or exceeds 70 points, the student is accepted as successful. The grading system in second cycle program is on 100 points. However other grading systems such as Literal Grading system or Grading System over 4 can also be adopted.

Quality Assurance-
Access Requirements

The applicants who hold a Master's Degree and willing to enroll in the Doctorate programme may apply to the Directorate of Graduate School with the documents. 1-Sufficient score (at least 55 out of 100) from the Academic Staff and Graduate Study Education Exam (ALES) conducted by Student Selection and Placement Center (OSYM) or GRE Graduate Record Examination (GRE) score or Graduate Management Admission Test (GMAT) score equivalent to ALES score of 55. 2-English proficiency (at least 70 out of 100 from the Profiency Exam conducted by Ege University Foreign Language Department, or at least 55 out of 100 from ÜDS (University Language Examination conducted by OSYM) or TOEFL or IELTS score equivalent to UDS score of 55. The candidates holding Bachelor's or Master's Degree taught totally in English are exempted from English proficiency requirement. The candidates fulfilling the criteria outlined above are invited to interwiev. The assessment for admission to masters programs is based on : 50% of ALES, 15% of academic success in the undergraduate programme (cumulative grade point average (CGPA) ) 10 % of academic success in the master's programme and 25% of interview grade. The required minimum interview grade is 60 out of 100. The candidates having an assessed score of 65 at least are accepted into the Doctorate programme. The results of the evaluation are announced by the Directorate of Graduate School.

Conditions for SuccessThe doctorate programme consists of a minimum of seven courses, with a minimum of 21 national credits, a qualifying examination, a dissertation proposal, and a dissertation. The period allotted for the completion of the Doctorate programmes is normally eight semesters (four years). However, while it is possible to graduate in a shorter time, it is also possible to have an extension subject to the approval of the graduate school. The seminar course and thesis are non-credit and graded on a pass/fail basis. The total ECTS credits of the programme is 240 ECTS. A student may take undergraduate courses on the condition that the courses have not been taken during the undergraduate program. However, at most two of these courses may be counted to the Doctorate course load and credits. The PhD students are required to take the Doctoral Qualifying Examination, after having successfully completed taught courses. The examination consists of written and oral parts. The Doctoral Qualifying Committee determines by absolute majority whether a candidate has passed or failed the examination. Students who fail the Qualifying Examination may retake the examination the following semester. Students failing the Examination a second time are dismissed from the program. Students must register for thesis work and the Specialization Field course offered by his supervisor every semester following the semester, in which the supervisor is appointed. A dissertation supervisor who must hold the minimum rank of assistant professor is appointed for each PhD student. When the nature of the dissertation topic requires more than one supervisor, a joint-supervisor may be appointed. A joint-supervisor must hold a doctoral degree. Periodic monitoring of research work by a thesis monitoring committee is required to be awarded the Doctoral degree. A student who has completed work on the thesis within the time period, must write a thesis, using the data collected, according to the specifications of the Graduate School Thesis Writing Guide. The thesis must be defended in front of a jury. The thesis jury is appointed on the recommendations of the relevant Department Chairperson and with the approval of the Administrative Committee of the Graduate School. The jury is composed of the thesis supervisor and 5 faculty members. Of the appointed jury members, up to two may be selected from another Department or another University. The co-supervisor cannot be the jury member. Thesis defense by the candidate is open to all audience and a jury decides to grant/deny the Doctoral degree. A majority vote by the jury members determines the outcome of the thesis or examination. The vote can be for "acceptance", "rejection" or "correction". A student may be given, by a decision of the Administrative Committee of the Graduate School, up to six months to complete the corrections. The student must then retake the thesis examination.
Progression Paths (Relationship Type)

The number of the graduates from Ege University Textile Engineering Department is …. Textile Engineering Department as the first established department in Turkey, and having the best infrastructure provided many lecture staff for other 12 textile engineering departments that were established afterwards. The majority of the second cycle students graduated from the department work in Ege University and in other universities in Turkey as an academic staff and a significant part of the other graduates work successfully at factories in Turkey and abroad, at R&D Centers, at Marketing, Export and Import Companies and at government entities such as TOBB (Union of Chambers and Commodity Exchanges of Turkey), Undersecretariat of the Prime Ministry for Foreign Trade, DPT (State Planning Organization), Ministry of Industry etc. Within the context of Article 35 and according to Scientific Human Resource Development Programme, in order to supply the need of qualified faculty members, students are accepted from other universities to our third cycle program. Until now academic staff from Uludağ, Pamukkale, Uşak, Süleyman Demirel and Erciyes Universities were graduated from our third cycle program.

Legal Basis-
Validity Period (If Any)

Belge sürekli geçerlidir.

Url Open Address
Qualification Code

TR0030015255


Qualification Title
Textile Engineering Doctoral Degree

Awarding Body
EGE UNIVERSITY

Awarding Body Contact
Ege University Rectorate Gençlik Caddesi 35040 Bornova – Izmir Telephone: (0-232) 311 10 10 Email: webadmin@ege.edu.tr

Awarding Body Url

Orientation
Academic

National Occupation Classification
-

EQF Level
8

TQF Level
8
The Qualification hasn't been included in TQF.

National Occupation Classification
-

Category
Main

Credit Value
-

Program Duration
-

Program Profile
-

Learning Environments
-

Description
  • Having the skill of leadership for building, designing,applying and costumizing a research process in textile engineering and/or relevant disciplines and the skill for decision making.
  • The skill for publishing both textile engineering and interdisciplinary studies in magazines as part of SCI and the skill of presenting them in international symposiums.
  • The skill for sharing academic and/or industrial information relevant to area of expertise and making contribution to improvement.
  • Awareness on the necessity for following the innovations and developments in the area of expertise.
  • The skill of improving an innovative idea, method, design and/or application about textile engineering or the skill for performing the current idea, method, design and/or application into a different field.
  • The skill for researching, comprehending, designing, costumizing and performing an original subject.

Key Competencies
-

Further Info

In order to enter the final exam of a second cycle lesson, students must fulfill the courses compulsory attendance. The final grade of the course is calculated by adding 40% of the score of the midterm examination, and 60% of the score of the final examination. When the final score equals to, or exceeds 70 points, the student is accepted as successful. The grading system in second cycle program is on 100 points. However other grading systems such as Literal Grading system or Grading System over 4 can also be adopted.


Quality Assurance
-

Access Requirements

The applicants who hold a Master's Degree and willing to enroll in the Doctorate programme may apply to the Directorate of Graduate School with the documents. 1-Sufficient score (at least 55 out of 100) from the Academic Staff and Graduate Study Education Exam (ALES) conducted by Student Selection and Placement Center (OSYM) or GRE Graduate Record Examination (GRE) score or Graduate Management Admission Test (GMAT) score equivalent to ALES score of 55. 2-English proficiency (at least 70 out of 100 from the Profiency Exam conducted by Ege University Foreign Language Department, or at least 55 out of 100 from ÜDS (University Language Examination conducted by OSYM) or TOEFL or IELTS score equivalent to UDS score of 55. The candidates holding Bachelor's or Master's Degree taught totally in English are exempted from English proficiency requirement. The candidates fulfilling the criteria outlined above are invited to interwiev. The assessment for admission to masters programs is based on : 50% of ALES, 15% of academic success in the undergraduate programme (cumulative grade point average (CGPA) ) 10 % of academic success in the master's programme and 25% of interview grade. The required minimum interview grade is 60 out of 100. The candidates having an assessed score of 65 at least are accepted into the Doctorate programme. The results of the evaluation are announced by the Directorate of Graduate School.


Conditions for Success
The doctorate programme consists of a minimum of seven courses, with a minimum of 21 national credits, a qualifying examination, a dissertation proposal, and a dissertation. The period allotted for the completion of the Doctorate programmes is normally eight semesters (four years). However, while it is possible to graduate in a shorter time, it is also possible to have an extension subject to the approval of the graduate school. The seminar course and thesis are non-credit and graded on a pass/fail basis. The total ECTS credits of the programme is 240 ECTS. A student may take undergraduate courses on the condition that the courses have not been taken during the undergraduate program. However, at most two of these courses may be counted to the Doctorate course load and credits. The PhD students are required to take the Doctoral Qualifying Examination, after having successfully completed taught courses. The examination consists of written and oral parts. The Doctoral Qualifying Committee determines by absolute majority whether a candidate has passed or failed the examination. Students who fail the Qualifying Examination may retake the examination the following semester. Students failing the Examination a second time are dismissed from the program. Students must register for thesis work and the Specialization Field course offered by his supervisor every semester following the semester, in which the supervisor is appointed. A dissertation supervisor who must hold the minimum rank of assistant professor is appointed for each PhD student. When the nature of the dissertation topic requires more than one supervisor, a joint-supervisor may be appointed. A joint-supervisor must hold a doctoral degree. Periodic monitoring of research work by a thesis monitoring committee is required to be awarded the Doctoral degree. A student who has completed work on the thesis within the time period, must write a thesis, using the data collected, according to the specifications of the Graduate School Thesis Writing Guide. The thesis must be defended in front of a jury. The thesis jury is appointed on the recommendations of the relevant Department Chairperson and with the approval of the Administrative Committee of the Graduate School. The jury is composed of the thesis supervisor and 5 faculty members. Of the appointed jury members, up to two may be selected from another Department or another University. The co-supervisor cannot be the jury member. Thesis defense by the candidate is open to all audience and a jury decides to grant/deny the Doctoral degree. A majority vote by the jury members determines the outcome of the thesis or examination. The vote can be for "acceptance", "rejection" or "correction". A student may be given, by a decision of the Administrative Committee of the Graduate School, up to six months to complete the corrections. The student must then retake the thesis examination.

Progression Paths (Relationship Type)

The number of the graduates from Ege University Textile Engineering Department is …. Textile Engineering Department as the first established department in Turkey, and having the best infrastructure provided many lecture staff for other 12 textile engineering departments that were established afterwards. The majority of the second cycle students graduated from the department work in Ege University and in other universities in Turkey as an academic staff and a significant part of the other graduates work successfully at factories in Turkey and abroad, at R&D Centers, at Marketing, Export and Import Companies and at government entities such as TOBB (Union of Chambers and Commodity Exchanges of Turkey), Undersecretariat of the Prime Ministry for Foreign Trade, DPT (State Planning Organization), Ministry of Industry etc. Within the context of Article 35 and according to Scientific Human Resource Development Programme, in order to supply the need of qualified faculty members, students are accepted from other universities to our third cycle program. Until now academic staff from Uludağ, Pamukkale, Uşak, Süleyman Demirel and Erciyes Universities were graduated from our third cycle program.


Legal Basis
-

Validity Period (If Any)

Belge sürekli geçerlidir.


Url
Open Address